WAMPLER 763815129259 Velvet Fuzz Pedal User Manual

WAMPLER 763815129259 Velvet Fuzz Pedal

INSTRUCTION

• Volume: Controls the total output volume of the pedal.
• Brightness: This adjusts between a much darker, bassier sound at the fully counterclock- wise position, to a brighter sound when turned fully clockwise.
• Fuzz: This controls the total amount of fuzz that is heard. The more you turn it clockwise, the fuzzier the sOund will become.
• Big/Tight Toggle Switch: This toggle switch in the up (“Big”) position, you will geta bigger sound that has a fat, but creamy fuzz quality to it. In the down (“Tight”) position, the tone is tighter and feels more like a heavy mixture of heavy overdrive and fuzz.
• Power: This pedal was designed around the usage of a 9v or 18vDC power source and is intended to sound its best at 9v. To avoid damage to the pedal, do not exceed 18VDC, do not use center pin positive adapters and do not use AC power. Using an incorrect power adapter can lead to damage and will void the warranty on the pedal. This pedal draws approximately 45mA at 9vdc. he warranty begins at the point of purchase.

WAMPLER Pedals Limited Warranty

WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service Or parts fo repair damage caused by accident, neglect, normal cosmefic wear, disaster, misUSe, abuse, negligence, inadequate packing or shipping procedures and service, repair or modifications to the product, which have not been authorized or opproved by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedly shall be repoir or teplacement as provided below.

RETURN PROCEDURES

In the unlikely event that a defect should ocur, follow the procedure outined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid and insured directly WAMPLER SERVICE DEPT -5300 Harbor Street, Commerce, CA 90040. A Return Authorization Number must be obtained from our Customer Service Department prior to shipping the product. Products must be shipped in their original packaging or its equivolent, in any cose, the risk of loss Or damage in transit is to be borne by the purchaser. Ihe Return Authorization Number must appear large print directly below the shipping addres. Aways include a briet description of the detect, along with your corect return address and telephone number. When emailing to inquire about a returned product, always reter to the Return Authorization Number. If WAMPLER determines that the unit was defective in materials or workmanship at any fime during the waranty period, WAMPLER has the opfion of repairing or replacing the product ot no additional charge, except as set forth below. All replaced parts become a property of WAMPLER. Products replaced or repaired under this waranty will be returned via ground shipping within the United Statesfreight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.

INCIDENTAL OR CONSEQUENTIAL DAMAGE In no event is WAMPLER liable for any incidental or consequential damages arising out of the use or inability to use of any WAMPLER product, even if WAMPLER or a WAMPLER dealer has been advised of the possibility of such damages, or any other dlaim by any other parly. Some states do not llow the exclusion or limitation of consequentiald damages, so the above limitation and exdusion may not apply to you. This warranty gives you Specific legal rights and yoU may also have ofher rights which may vary from stofe fo sfafe.

FOR YOUR PROTECTION

Please complete the online warranty registration within (10) ten doys of the date of purchase so that we may contact you directly in the event a satety notificafion issued in accordance with the 1972 Consumer Product Satety Act.

FCC

This equipment has been tested and found to comply with the limits for a Closs B digital device, pursuant to part 15 of the FCC Roles. These limits are designed to provide reasonable protection against harmtul interterence in a residenfial instllofion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmtul inteterence to radio communicafions. However, there is no guarantee that interference will not occur in a particular instalation. If this equipment does cause harmtul interterence to radio or television reception, which can be determined by furning the equipment oft and on, the user is encouraged to fry to corect the interterence by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit ditferent trom thot to which the receiver is connected.
• Consult the dealer or an experienced radio/ IV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>