PELADN WI-6 Mini PC User Manual

June 17, 2024
PELADN

PELADN WI-6 Mini PC

Please read these instructions carefully before use and keep them in a safe place in case you need to refer to them again;
Thank you for choosing to use the MINI PC products. This product has excellent quality and performance. For your convenience, please read the manual carefully and follow the steps in the manual. Our upgrading service will accompany you from the beginning to the end! If you have any problems, please contact us at the phone number and address on the warranty card, we are always at your service!

Basic Operation

Port Description:

  1. Connect with headphone microphone
  2. connect with Type-c peripheral device
  3. Connect with USB peripheral device
  4. ON/OFF
  5. Connect with HDMI cable
  6. connect with use peripheral device crl.
  7. Connect with an ethernet cable
  8. connect with adapter

Products and accessories

  1. Mini computer
  2. User manual
  3. HDMI HD output cable
  4. Power adapter
  5. Wall-Mounted bracket

Failure to use the included power adapter may violate regulatory compliance requirements and may expose the user to safety hazards.”Specifications are subject to the physical product.

Wall-Mounted bracket

PELADN-WI-6 -Mini-PC-fig- \(2\)

Precautions For Usage Notes

In order to continue to improve the user experience, we may occasionally update app and firmware.

  • Do not th row the product into the fire to prevent fire accident.
  • Do not use harsh of chemical solvent, or cleaning products, We recommend using a soft cloth to wipe.
  • Do not attempt to open the housing orto repair, if a failure occurs, please contact customer service.
  • Please pay attention to liquids and be careful of electric shock while cleaning electronic goods.
  • Check for any frayed or damaged cords or plugs.
  • Don’t arbitrarily discard the product, we should protect the environment.
  • Working environment: 5°C-35°C, 30%-90% humidity.
  • Storage environment:-20°C-6D°C, 10%-90% humidity.

PELADN-WI-6 -Mini-PC-fig- \(4\)

FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consu It the dealer or an experienced radio{technician for help.

Manufacturer

Manufacturer: Shenzhen Panlel Intelligent Technology Co.,Ltd.

  • Address: No.5 Lirong Road, Xinshi Community, Dalang Street,
  • Longhua New District, Shenzhen
  • Tel: 400-998-3678

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals