DAY 73361 Indoor-Outdoor Thermometer and Clock Instruction Manual

DAY 73361 Indoor-Outdoor Thermometer and Clock

INDOOR/OUTDOOR THERMOMETER AND CLOCK

Technical data

• Manual time setting
• Time in optional AM/PM hour format Temperature alternatively in °C or °F Thermometer:
• Indoor measurement ranges: O °C (32 °F) ~ +50 °( (122 °F)
• Outdoor measurement ranges: -40 °C (-40 F) ~ +70 °( (158 °F)
• Display today Hi/Lo Temperature Battery: 1 x CR2025 (included)

LCD screen and settings

1. Outdoor temperature
2. Temperature trend
3. Indoor temperature
4. AM/PM hour format
5. Time
6. Hi/Lo temperature
7. Ice warning

Initial operation
Pull out the battery compartment on the rear and insert the battery in the slot. Pay attention to the correct polarity. Insert the battery compartment.
When you insert the battery, all the icons on the LCD display will briefly light up for 3 seconds, the hour display will start to flash for 30 seconds, and the device will detect indoor/out temperature and Hi/Lo Outdoor Temperature.

Function keys

Manual time setting

• Press and hold the SET/°C/°F button for 3 seconds. The Hour displays starts to flash. Now use the MODE/IN/OUT button to set the correct hour.
• Press SET/°C/°F to confirm your setting. The Minute displays starts to flash. Now use the MODE/IN/OUT button to set the correct minute.
• Press SET/°C/°F to confirm your setting. The AM/PM hour mode will display. Now the use MODE/IN/OUT button to set the correct AM/PM hour mode.

Press SET/°C/°F to confirm your setting and to end the setting procedures. The clock mode will be displayed.

Ice warning

• If the recorded temperature falls between – C to+ 1 °C (26.6 °F to 33.8 °F), the ice warning indicator (7) will flash. It will stop flashing once the temperature is out of this range.

Temperature

• In temperature mode, press MODE/IN/OUT briefly to switch between indoor and outdoor temperature display. The Hi/Lo record will display accordingly.
• Press and hold MODE/IN/OUT for 3 seconds to switch between the time mode and Hi/Lo record mode freely.

C/°F temperature display

• The temperature is displayed in either °C or 0 F. Briefly pressing the SET/°C/°F button allows you to switch between the individual modes.

Temperature trend

• The product will scan and display the current temperature every 30 seconds.
• The current temperature will be compared with the previous record: the up arrow (2) will display for a 1 ° increase; the down arrow (2) will display for a 1 ° fall. No arrow displays if the temperature changes +/-1 ° within one hour.

Note

• If the temperature reading is below the specified ranges, LL.L will be displayed.
• If the temperature reading is above the specified ranges, HH.H will be displayed.

Environmental information

Electrical and electronic equipment (EEE) contains materials, components and substances that may be hazardous and harmful to human health and the environment.

if waste electrical and electronic equipment (WEEE) is not disposed of correctly. Products marked with a crossed-out wheeled bin are electrical and electronic equipment. The crossed-out wheeled bin indicates that waste electrical and electronic equipment must not be disposed of with unsorted household waste, but must be collected separately.

Manufactured in P.R.C.

Manufacturer:

• Schou Company A/S
• Nordager 31
• DK-6000 Kolding

All rights reserved. The content of this manual may not be reproduced, either in full or in part, in any way by electronic or mechanical means, e.g. photocopying or publication, translated or saved in an information storage and retrieval system without written permission from Schou Company NS.

Service centre
Note: Please quote the product model number in connection with all inquiries.
The model number is shown on the front of this manual and on the product rating plate.
For:

• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>