Day-Brite CFI 911401855781 Motion Sensor Remote Control User Manual

Table of Contents

Day-Brite CFI 911401855781 Motion Sensor Remote
Control

Day-Brite CFI 911401855781 Motion Sensor Remote Control
1

Day-Brite CFI 911401855781 Motion Sensor Remote Control
5

LED| Description| LED| Description| LED| Description
---|---|---|---|---|---

BRIGHTNESS

|

High end trim turning function(To Set the output level of connected lighting during occupancy).

|

STAND- BY DIM

|

To set the output level of connected lighting during vacancy. The sensor will regulate the lighting output at the set level.

|

SENSITIVITY

|

To set the occupancy sensing sensitivity of the Sensor.

HOLD TIME

|

The time that the Sensor will dim the light to a low level after the area is vacated.

|

STAND- BY TIME

|

To represents the time that the sensor will keep the light at low dim level after the HOLD TIME elapsed.

|

DAYLIGHT SENSOR

|

To represents various thresholds of natural light level for the sensor.

Press button to show latest configurations.
Press “BRIGHTNESS”,“HOLD TIME”,“STANDBY DIM”,“STANDBY TIME”,“SENSITIVITY”,“DAYLIGHT” button to select new parameters.
Aim at the luminaire and press button to upload new parameters. The luminaire will flicker ON and OFF once as confirmation

Long press button 3-5 seconds until the brightness indicator light is on(first-row).
Switch on mode, press button to select new parameters.
Aim at the luminaire and press button to upload new parameters. The luminaire will flicker ON and OFF once as confirmation.
Aim at the luminaire and press button to turn off or turn on the fixture.
Aim at the luminaire and long press button 3-5 seconds to quit on/off switch mode. The luminaire will flicker ON and OFF once as confirmation.

Note:

Press any button to light up the indicator on the remote , and then press the “SEND” button, The luminaire will flicker ON and OFF once as confirmation.
Note: if there is no operation within 10 seconds, the indicator on the rem ote will be turned off automatically.
ON/OFF Switch Mode: Except for the “ON/OFF”, “BRIGHTNESS”, and “SEND” buttons, the other buttons will be disabled. Long press “ON/OFF” button 3-5 seconds to quit switch on/off mode (switch to the sensor sensing mode.)
TEST Sensitivity Mode: Except for the “TEST”, “SENSITIVITY”, and “SEND” buttons, the rest of the buttons will be disabled. Press the “TEST” button again to quit this mode.
HB03R IR Remote, can not pass through walls and other opaque materials, please make sure that there is no object blocking between the remote and the sensor when using.
HB03R is designed without waterproof function, please avoid long-term placement in damp environment when using.

Press button, the remote LED indicators will show the latest paramete
Long press button 3-5 seconds until the brightness indicator light is on
Press button to select daylight lux
Aim at the target sensor and press The luminaire will flicker ON and OFF once as confirmation.
Aim at the target sensor and long press to turn off daylight sensor function

The light switches on at 100% when there is movement detected.
The light dims to stand-by level after the hold-time.
The light remains in dimming level at night.
When the natural light level exceeds setpoint off to light,the light will turn off even if when the space is occupied.
The light automatically turns on at 10% when natural light is insuffcient (no motion).

Hold-time: 30min
Stand-by Dim: 10%
Stand-by time: (Daylight priority mode: the stand-by time is only ,otherwise is daylight threshold mode.)

Note

Daylight Priority Mode: the illuminance value to turn on/off the lamp automatically controlled by the photocell
Daylight Threshold Mode: the illuminance value to turn on the lamp when detected motion controlled by the photocell at each gear are: 10lx,30lx,50lx,100lx.

Warning
Remove the batteries from compartment if the remote will not be used in 30 days.