VERSA DESK 60201-DWS15-01E-01 32 Inch Electric Standing Desk Converter User Manual

VERSA DESK 60201-DWS15-01E-01 32 Inch Electric Standing Desk Converter

Product Information

Specifications

• Compatibility: Any monitor stand and tablet

Product Usage Instructions

Step 1: Assembling Power Cables

1. Cut off the plastic strip lock.
2. Assemble the power cables.

Step 2: Plugging in Power Cable and Raising Desktop

1. Plug in the power cable.
2. Raise the desktop to a comfortable height.

Step 3: Attaching Keyboard Tray

1. Apply protective padding on the underside of the keyboard tray.
2. Slide in the keyboard tray.
3. Attach it securely to the frame.

Step 4: Routing Cables with Cable Organizers

1. Apply cable organizers under the desktop.
2. Neatly route the cables using the cable organizers.

Step 5: Attaching Monitor Arm

1. Remove the plastic cap from the monitor arm.
2. Attach the monitor arm securely.

Frequently Asked Questions (FAQ)

• Q: What are the compatibility options for this product?
  A: This product is compatible with any monitor stand and tablet.

• Q: Are there any additional accessories required for using this product?
  A: No, this product comes with all the necessary components for use.

• Q: Can I adjust the height of the desktop?
  A: Yes, you can raise or lower the desktop to a comfortable height.

Preface

This electric sit-stand workstation consists of a desk frame, a keyboard tray and a motorized height adjustment system. Please read and completely understand this manual before installation in order to make sure the safe and correct use of the system and maintain the longevity of the overall construction and the built-in electronics.

Instructions of Safety and Warnings:

• Any failure to comply with the safety and installation instructions in this manual may cause serious bodily injury.
• Overlooking any part of the instructions, warnings and additional information marked with the “Note” and “Li-,” may result in serious damage to the system or its components.
• Children should never be allowed to operate or touch the product without direct supervision of an adult. Users should prevent children from being near or around the workstation during operation.
• Disabilities and/or lack of experience and knowledge should be prevented from using the product unless under supervision or assisted during use and operation.
• Never sit on or exceed the rated weight of the workstation.

Electrical Safety Instructions:
The product is powered by electricity. In order to avoid burns, fire and electric shock, please read the instructions carefully.

• Don’t clean the product with water while the power is still connected.
• Don’t disassemble or replace components while the power is still connected.
• Never operate the system with a damaged cord or plug. Please contact your point of purchase to replace the damaged parts.
• Never operate the system if it’s in moist environment or its electrical components have contact with liquids.
• Don’t operate the system if the control box makes noise or odor. Alterations of the given power unit and control box aren’t allowed.

Other Safety Instructions:

• Remove any obstacles from the area around the workstation during assembly and subsequent use.
• Organize all cords and wires to prevent any possible accidents from occurring.
• Never attempt to modify or change the frame or components that operate the workstation.
• Don’t add anything to the adjustable junctions of the frame.
• The workstation is rated for Indoor Use Only.

Disposal: The product with this mark indicates that this product shouldn’t be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the local recycle service or contact your point of purchase to withdrawn the product.

Preparation

1. What are the specifications you need to know?
2. What are the tools you V require while installation?
3. What’s the thing you’d better have before installation?
4. Things you need to know before installation?
   Ensure that you have received all parts according to the component checklist prior to installation. If any of the components are missing or damaged, contact your local seller for a replacement.

Checklist and Installation

INSTALLATION

1. Cut off plastic strip lock. Assemble power cables.
   WARNING: Do not press the release handle while cutting off the plastic strip lock. Only press the release handle in an upright position.

2. Plug in power cable and raise desktop.

3. Apply protective padding on the underside of the keyboard tray.

4. Slide in keyboard tray and attach it to the frame.

5. Apply cable organizers under desktop to neatly route cables.

6. Use with any monitor stand and tablet OR
   Attach a monitor arm by removing the plastic cap.

Technical Support: engineering@versaproducts.com
Customer Service: support@versadesk.com
1 800-465-7660

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>