10DM NTS500 Industrial Borescope User Manual
- June 6, 2024
- 10DM
Table of Contents
10DM NTS500 Industrial Borescope User Manual
Product Manual
The NTS500 Is 1l high perforrn1lnce industrial borescope wl1h 11 5-lnch high definition color LCD, It is ergonomically designed so that the main function buttons can be controlled with one hand. The snapshot and recording functions are supported, while the photos and videos are saved to a TF memory card (micro-SD card). This product Integrates high lightness ,flashlight and a 5-LED for the boomers probe, so that the product can be used in dark environment. The built-in 3500mAh rechargeable lithium battery has a working time of up to hours.
The camera probe is interchangeable, it can be swapped for different probes with alternate lengths, diameters, view angles and focal lengths.
Warning: This product is an industrial bor0SCope camera and is not intended for medical use or human examination.
Safety and Maintenance
- Please avoid hitting the camera probe, and do not pull on the cable.
- The Coomera probe is covered in a waterproof protective layer. Please avoid damaging this layer as best possible.
- The camera probe is temperature sensitive and should not exceed an temperature above 113°F (45°C). Take care when inspecting automotive engines to make sure the engine has cooled.
- Keep the tool dry, clean, free from oil I, water, gas or other matter that may cause corrosion.
- This appliance is not intended to be used by people with limited physical, ogonori or mental capabilities. This appliance is not intended for medical use.
- Koop bystanders or children away while operating the loo!.
- If the device is damaged, do not disassemble it Please contact Teslong customer service – see last page of this manual.
Battery Description
- Please use a 5V household charger that moots the safety regulations to charge this device.
- This device can work while charging.
- If you do not use the device for a long time. please ensure that it is charged at least once every 3 months to prevent Irreparable damage caused by excessive battery discharge.
Functions
- Camera probe connector
- Light control button: Adjust the LEDs brightness of the camera
- Snap button Take a photo or start/end video recording
- Enter button; Confirm selection/Freeze screen
- Up and down selection button
- Switch between three modes: Photo taking, Video recording and Playback
- Settings button: Enter/exit settings menu
- Power button: Lang press to tum on/off
- Hanging ring
- Charging port
- TF card slot
- Flashlight
- Flashlight On/Orr Switch
- Speaker
- Microphone
- Reset
Instructions
- Power off the device first before inserting if card
- Makes sure the orientation of the TF card Is correct before Inserting.
- Do not use excessive pressure when inserting or removing the TF 0ird.
- Only take photos or record video when a 1F card is inserted.
- This device requires Class 10 high spoof TF card and it will not be able to wonk properly with Class 4 low spoof card.
Language Settings
The default language is English and the system supports English Chinese, German, French, Spanish, Italian, Russian and Japanese.
Setting path:
- Press the button twice to enter setting page
- Select second item (Language) on settings page
- Pross up and down keys Looked the language
- Press 8 to save your choice
Photo Taking/ Video Recording/ Playback
Copy photo and video files to a computer
- Use a TF card reader to copy data directly.
- Use a USB cable to connect to a computer for copying & charging.
Pull out probe camera first before using USB cable.
Specifications
Screen
Screen: 5 inches color LCD
Screen resolution (pixels): 1 280×720
Probe resolution (pixels): 1280×720
Image resolution (pixels): 1920×1 080
Video recording resolution (pixels): 7 280x72D
Port; Micro USB charging port, TF memory card slot
Camera
Diameter: 7.9mm or optional
Cables Length, optional
Resolution: 1 .0 Megapixel
Viewing Ang le: 70°
Depth of Field: Front camera A: 1 .2-4.0 inches (30mm-1 00mm),
Side camera B: 0.8-2.4 Inches (20mm- 60mm),
Side camera C: 0.6- 2 .4 inches (15mm-30mm)
Light Source; 6 adjust able high-intensity LEDs
Waterproof: IP67
Others
LED flashlight: 1 W CREE LED
Battery 3500mAh rechargeable lithium battery
Battery life: 2-4 hours
Operating temperature: 32°F~113°F ( 0ºc-4 5° C)
Charging time: 3- 4 hours ( if USB 5V = 1 A charger )
Certificate; CE FCC ROHS
Languages: English, Chinese, German, French, Spanish, Italian, Russian,
Japanese
Includes
Borescopes Device, Cable with probe, Micro- USB charging cable, User manual, Protective case.
Customer Service
Please contact the manufacturer if you have any questions, we would love to hear from you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>