FLASH P7100446 Vintage LED PAR 64 COB SHORT Mk2 300W RGBWA User Manual

FLASH P7100446 Vintage LED PAR 64 COB SHORT Mk2 300W RGBWA

INTRODUCTION

Thank you for purchasing Vintage LED PAR 64 COB SHORT Mk2 300W RGBWA. For safety reasons and to ensure the trouble-free operation, carefully read the instructions.

 SAFETY INFORMATION

1. Installation should be done by qualified personnel in order to minimize the risk of accidental electric shock
2. Disconnect the power supply before installation.
3.  Before connecting the unit to the mains, make sure it is not damaged mechanically. If you notice any signs of damage you should contact your dealer immediately. Do not connect the device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
6. Always use steel security cable to attach the device to a stable structure
7.  Do not connect power supply to more than 3 devices in series.

 PRODUCT INFORMATION

The device is equipped with high-quality, bright COB LED with Red, Green, Blue, White and additional Amber chips. Unique design, high quality and high durability make this device a great tool for both power users and those, who value simplicity and reliability. The ergonomic double bracket (included) facilitates the use of the device in any condition. In order to expand the range of mounting options, the holder has an additional mounting holes. The electronics is made of high quality components and offers several features such as:

 Features

•  16-bit dimming resolution
•  Various dimming curves for smooth dimming in 8-bit mode
•  Dim delay (light bulb simulation)
• Full DMX signal regeneration
• Electronic protection against overheating
•  THEATRE or DISCO cooling volume modes.
•  Permanent color correction
•  Native support for optional wireless DMX module

Specification

•  Power consumption: 300W
•  Power supply voltage: 100 – 245V
•  Voltage frequency: 50/60Hz
•  Diode type: COB 5in1
• Number of diodes: 1
•  Diode power: 300W
•  Display: Color LCD 1,8”
• Color: RGBWA
• Beam angle (min): 37°
• Beam angle (max): 37°
•  Dimming: Linear: 0 – 100%
•  Number of DMX channels:
•  DMX standard: DMX 512
•  Control interface: 4 buttons
•  Operating modes: DMX512, Auto, Sound-controlled, Manual color, Master
•  Features: 16-bit dimming, DMX Signal regeneration, Electronic protection against overheating
• AC IN: power CON
•  AC OUT: power CON
•  DMX IN: XLR – 3 pin
• DMX OUT: XLR – 3 pin
•  IP Rating: IP20
•  Housing made: ABS
• Cooling: Active
•  Height [cm]: 27
•  Width [cm]: 30
•  Depth [cm]: 13
• Weight [kg]: 3,6
•  Weight with packaging [kg]: 4,4
•  Set includes: Power cord, Double bracket, Barn Doors

INSTALLATION

After removing the packaging, check if the device was not damaged during transport. Before connecting to the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage caused by unstable mounting.
CAUTION
 Always use steel security cable to attach the device to a stable structure.
Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are consistent with device requirements. All activities, including connecting the device to the mains must be performed by qualified personnel.

 CONNECTIONS

The device is equipped with the following interfaces:

1. DMX (in/out): XLR 3-pin socket
2. Power (in/out): power CON socket

 Connecting DMX signal

The connection is performed using cable with XLR-female -> XLR-Male plugs.

 Voltage specification

Connecting power supply

The connection is performed using power cable with Power Con connector (included). The device must be operated by qualified personnel. Make sure that the power grid supply parameters are consistent with device parameters and limitations are not exceeded.
CAUTION
In the case of cable damage do not attempt to repair. Replacement or repair can be made only on the manufacturer or by a person with appropriate permissions.
Maximum number of devices connected in series: 3

 OPERATION MANUAL

 Control panel

The control panel is equipped with LCD display and 4 control buttons with the following functions:

1. ESC – go back from the selected options, go to upper menu, cancel changes
2. DOWN – choose option, edit parameter
3. UP – choose option, edit parameter
4. ENTER edit selected option, confirm changes

Master / slave

To achieve desired effects with Master/slave mode set the first device in DMX chain as Master (MASTER function is [ON] ). Set the following devices to DMX mode -> Classic 8 -> CH 001

DMX channel list

0-10: No Function
11-255: Strobe 1-20Hz

CH 3| Red| 0-255: 0-100%
CH 4| Green| 0-255: 0-100%
CH 5| Blue| 0-255: 0-100%
CH 6| White| 0-255: 0-100%
---|---|---
CH 7| Amber| 0-255: 0-100%
CH 8| Empty| No function
Standard 10 [10CH]

Channel| Function| Effect
CH 1| Dimmer| 0-255: 0-100%
CH 2| Strobe| 0-10: No Function

11-255: Strobe 1-20Hz

CH 3| Red| 0-255: 0-100%
CH 4| Green| 0-255: 0-100%
CH 5| Blue| 0-255: 0-100%
CH 6| White| 0-255: 0-100%
CH 7| Amber| 0-255: 0-100%
CH 8| Empty| No function
CH 9| Color / Macro| 0-5: no function
6-10: red
11-15: green
16-20: blue
21-25: cyan
26-30: magenta
31-35: yellow
36-40: light-red
41-45: light-green
46-50: light-blue
51-55: orange
56-60: mint
61-65: sky blue
66-70: light-cyan
71-75: light-magenta
76-80: light-yellow
81-85: white
86-90: white 9000k
91-95: white 6500k
96-100: white 5600k
101-105: white 5000k
106-110: white 4500k
111-115: white 3200k
116-120: white 2500k
121-125: white 2200k
126-130: macro 1 – step change: red-green-blue
131-135: macro 2 – step change: red-green-blue-cyan-magenta-yellow-white
136-140: macro 3 – step change: red-green-blue-cyan-magenta-yellow 141-145: macro 4 – step change: red-magenta-blue-cyan-green-yellow 146-150: macro 5 – fade: red-green-blue
151-155: macro 6 – fade: red-green-blue-cyan-magenta-yellow-white
156-160: macro 7 – fade: red-green-blue-cyan-magenta-yellow
161-165: macro 8 – fade: red-magenta-blue-cyan-green-yellow
166-170: macro 9 – fade: red-orange-yellow
171-175: macro 10 – fade: red-violet-blue-magenta
176-180: macro 11 – fade: green-cyan-blue-violet
181-235: no function
236-240: sound mode 1 – step change: red-green-blue
241-245: sound mode 2 – step change: red-green-blue-cyan-magenta-yellow-white
246-250: sound mode 3 – step change: red-green-blue-cyan-magenta-yellow
251-255: sound mode 4 – step change: red-magenta-blue-cyan-green-yellow
CH 10| Speed| if CH7 is set to 6-125 (color) 0-5: no function 6-255: pulse speed, fast to slow
if CH7 is set to 126-180 (macro) 0-255: macro speed, fast to slow
---|---|---
Pro 8 [8CH]

Channel| Function| Effect
CH 1| Red| 0-255: 0-100%
CH 2| Green| 0-255: 0-100%
CH 3| Blue| 0-255: 0-100%
CH 4| White| 0-255: 0-100%
CH 5| Amber| 0-255: 0-100%
CH 6| Empty| No function
CH 7| Dimmer| 0-255: 0-100%
CH 8| Strobe| 0-10: no function
11-255: strobe 1-20Hz
Pro 9 [9CH]

Channel| Function| Effect
CH 1| Red| 0-255: 0-100%
CH 2| Green| 0-255: 0-100%
CH 3| Blue| 0-255: 0-100%
CH 4| White| 0-255: 0-100%
CH 5| Amber| 0-255: 0-100%
CH 6| Empty| No function
CH 7| Dimmer| 0-255: 0-100%
CH 8| Dimmer fine| 0-255: fine adjustment (16-bit)
CH 9| Strobe| 0-10: no Function
11-255: strobe 1-20Hz
RGB [3CH]

Channel| Function| Effect
CH 1| Red| 0-255: 0-100%
CH 2| Green| 0-255: 0-100%
CH 3| Blue| 0-255: 0-100%
RGBWA [6CH]

Channel| Function| Effect
CH 1| Red| 0-255: 0-100%
CH 2| Green| 0-255: 0-100%
CH 3| Blue| 0-255: 0-100%
CH 4| White| 0-255: 0-100%
CH 5| Amber| 0-255: 0-100%
CH 6| Empty| No function
RGB 16-bit [6CH]

Channel| Function| Effect
CH 1| Red| 0-255: 0-100%
CH 2| Red fine| 0-255: fine adjustment
CH 3| Green| 0-255: 0-100%
CH 4| Green fine| 0-255: fine adjustment
CH 5| Blue| 0-255: 0-100%
CH 6| Blue fine| 0-255: fine adjustment
RGBWA 16-bit [12CH]

Channel| Function| Effect
CH 1| Red| 0-255: 0-100%
CH 2| Red fine| 0-255: fine adjustment
CH 3| Green| 0-255: 0-100%
CH 4| Green fine| 0-255: fine adjustment
CH 5| Blue| 0-255: 0-100%
CH 6| Blue fine| 0-255: fine adjustment
CH 7| White| 0-255: 0-100%
CH 8| White fine| 0-255: fine adjustment
CH 9| Amber| 0-255: 0-100%
CH 10| Amber fine| 0-255: fine adjustment
CH 11| Empty| No function
CH 12| Empty| No function
Flash A-DMX [8CH]

Channel| Function| Effect
CH 1| Red| 0-255: 0-100%
CH 2| Green| 0-255: 0-100%
CH 3| Blue| 0-255: 0-100%
CH 4| White| 0-255: 0-100%
CH 5| Dimmer| 0-255: 0-100%
CH 6| EMPTY| 0-255: no function
CH 7| Strobe| 0-10: no function
11-255: strobe 1-20Hz
CH 8| Color / Macro| 0-5: no function
6-10: red
11-15: green
16-20: blue
21-25: cyan
26-30: magenta
31-35: yellow
36-40: light-red
41-45: light-green
46-50: light-blue
51-55: orange
56-60: mint
61-65: sky blue
66-70: light-cyan
71-75: light-magenta
76-80: light-yellow
81-85: white
86-90: white 9000K
91-95: white 6500K
96-100: white 5600K
101-105: white 5000K
106-110: white 4500K
111-115: white 3200K
116-120: white 2500K
121-125: white 2200K
126-130: macro 1 – step change: red-green-blue
131-135: macro 2 – step change: red-green-blue-cyan-magenta-yellow-white
136-140: macro 3 – step change: red-green-blue-cyan-magenta-yellow 141-145: macro 4 – step change: red-magenta-blue-cyan-green-yellow 146-150: macro 5 – fade: red-green-blue
151-155: macro 6 – fade: red-green-blue-cyan-magenta-yellow-white
156-160: macro 7 – fade: red-green-blue-cyan-magenta-yellow
161-165: macro 8 – fade: red-magenta-blue-cyan-green-yellow
166-170: macro 9 – fade: red-orange-yellow
171-175: macro 10 – fade: red-violet-blue-magenta
176-180: macro 11 – fade: green-cyan-blue-violet
181-235: no function
236-240: sound mode 1 – step change: red-green-blue
241-245: sound mode 2 – step change: red-green-blue-cyan-magenta-yellow-white
246-250: sound mode 3 – step change: red-green-blue-cyan-magenta-yellow
251-255: sound mode 4 – step change: red-magenta-blue-cyan-green-yellow

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>