FLASH FURNITURE YK-1077-GY-Q-GG Upholstered Platform Bed Instruction Manual
- October 30, 2023
- Flash Furniture
Table of Contents
FLASH FURNITURE YK-1077-GY-Q-GG Upholstered Platform Bed
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you
begin. Carefully remove all of the components from the packaging and set aside
for assembly. Assemble on a soft surface to prevent scratching during
assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in
personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to
product or components may result.
Warning: CHOKING HAZARD – Small Parts. Adult Assembly Required.
lnjury may result from tipping furniture. You must install the Tipping
Restraint Hardware with the unit to prevent the unit from tipping and causing
any accidental injury, instability, death or damage. The tipping restraint is
intended only as a safety measure, it is not a substitute for proper adult
supervision.
This tipping restraint is not an earthquake restraint. lf you wish to add the
extra security of earthquake restraints, they must be purchased and installed
separately.
Serious or fatal crushing injuries can occur from furniture tipping over. To
prevent furniture from tipping over it must be permanently fixed to the wall.
Fixing devices for the wall are not included since different wall materials
require different types of fixing devices. Use fixing devices suitable for the
walls in your home
Failure to detach this restraint before moving furniture may result in injury
or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Have a Question/Concern?
Quality products and first-class customer service are the cornerstone of long-
lasting consumer relationships. We strive toward excellence in all we do and
want you to be completely satisfied with your purchase.
Please contact our exceptional Customer Experience Agents at the email address
or phone number shown below to assist you with any product questions or issues
before requesting a return.
We look forward to serving you in a friendly, efficient manner to resolve any
issues you may have.
Customer Seryice Email:
[email protected]
Customer Service Phone: 866-552-2810
Our Warrantv Statement
This warranty covers manufacturing defects associated with your new product. The product is warranted from the original purchase date and to the original purchaser for normal usage, according to the below-referenced specifications and limitations.
- Non-moving metal parts are warranted for 5 years,
- Component parts including pneumatic cylinder, control mechanism, base and casters are warranted for 2 years.
- All other items are warranted for 1 year.
Normal usage means use in compliance with the restrictions and welght limits specified for the product. ln the absence of product-specific restrictions and weight limits, normal usage means use for no more than forty hours per week by persons weighing 250 lbs. or less. Coverage terminates if the product is sold or otherwise transferred. Repairs made by parties otherthan Belnick also void this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence, alteration, assembly, installation, attachments, accident, vandalism, acts of nature or any other event beyond the control of Belnick; (2)tearing, scratching, scuffing, or blemishing of leather or fabric; (3) cosmetic damage that may result from normal usage; {4) damage attributable to use by persons exceeding specified weight limits or commercial use exceeding forty hours per week; or (5) rust or other damage caused by exposure to moisture. The user assumes all risk of injury resulting from use of this product. Liability for incidental or consequential damage is excluded. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Part
Hardware
NOTE: Phillips Screwdriver Required (Not Included)
NOTE: Unzip liner to access screw holes.
Step 11: Insert (4) M6x50mm Screws (Part G) through the Support Slats (Part 8) and the Center Rails (Part 7) and attach to the Center Legs (Part 6). Tighten using M4 Small Allen Wrench (Part L).
