Flash Furniture YK-1078-BEIGE-T-GG Hollis Twin Size Upholstered Platform Bed Instruction Manual

Flash Furniture YK-1078-BEIGE-T-GG Hollis Twin Size Upholstered Platform

Bed

Product Information

Upholstered Platform Bed

The Upholstered Platform Bed is a high-quality, sturdy bed designed for long- lasting use. It comes in three sizes: Twin, Full, and Queen. The bed features a headboard, footboard, and support slats for added comfort and stability. The bed is available in three colors: beige, gray, and charcoal.

Product Warranty Statement

The bed comes with a warranty that covers manufacturing defects associated with the product. Non-moving metal parts are warranted for 5 years, and component parts including pneumatic cylinder, control mechanism, base, and casters are warranted for 2 years. All other items are warranted for 1 year.

Product Parts List

• Part 1: Left & Right Side Rails – 4 pcs
• Part 2: Headboard – 1 pc
• Part 3: Footboard Legs – 2 pcs
• Part 4: Headboard Legs – 4 pcs
• Part 5: Left & Right Side Legs – 2 pcs
• Part 6: Center Legs – 2 pcs
• Part 7: Center Rail – 1 pc
• Part 8: Support Slats – 4 pcs
• Part 9: Footboard – 2 pcs
• Part 10: Headboard Wings – 2 pcs

The bed also comes with various hardware pieces needed for assembly.

Product Usage Instructions

1. Unpack all the parts and hardware from the package and identify them.
2. Attach the Headboard Wings (Part 10) to both sides of the Headboard (Part 2) using (4) M8x35mm Screws (Part A), (4) M8x1mm Large Lock Washers (Part B), and (4) M8x1mm Large Flat Washers (Part C). Tighten using M5 Large Allen Wrench (Part M).
3. Attach the Headboard Legs (Part 4) to the Headboard (Part 2) using (4) M8x20mm Screws (Part E). Tighten using M4 x 95mm Small Allen Wrench (Part L).
4. Attach the Left & Right Side Rails (Part 1) to the Headboard (Part 2) and Footboard (Part 9) using (8) M6 x 45mm Screws (Part F), (8) M6 x 1mm Small Lock Washers (Part J), and (8) M6 x 1mm Small Flat Washers (Part K).
5. Attach the Footboard Legs (Part 3) to the Footboard (Part 9) using (4) M8x35mm Screws (Part A), (4) M8x1mm Large Lock Washers (Part B), and (4) M8x1mm Large Flat Washers (Part C). Tighten using M5 Large Allen Wrench (Part M).
6. Attach the Left & Right Side Legs (Part 5) and Center Legs (Part 6) to the Center Rail (Part 7) using (8) M6 x 25mm Screws (Part H). Tighten using M4 x 95mm Small Allen Wrench (Part L).
7. Attach the Support Slats (Part 8) to the Left & Right Side Rails (Part 1) and Center Rail (Part 7) using (12) M30 Self Tapping Screws (Part I).
8. Adjust the height of the bed using (8) M6 x 23mm Adjustable Height Glides (Part D).
9. Make sure all screws and bolts are tightened securely before use.
10. Do not allow children to climb on the furniture.

If you have any questions or concerns about the product, please contact our Customer Experience Agents at CustomerExperience@belnick.com or 866-552-2810 before requesting a return.

ASSEMBLY INSTRUCTIONS

Before You Begin
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.

Caution

• Tighten all components securely before use. Failure to do so may result in personal injury.
• DO NOT use any sharp objects to open plastic-wrapped components as damage to the product or components may result.

Warning

• CHOKING HAZARD-Small Parts. Adult Assembly Required. Injury may result from tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit from tipping and causing any accidental injury, instability, death or damage.
• The tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
• This tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake restraints, they must be purchased and installed separately.
• Serious or fatal crushing injuries can occur from furniture tipping over. To prevent furniture from tipping over it must be permanently fixed to the wall.
• Fixing devices for the wall are not included since different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home.
• Failure to detach this restraint before moving furniture may result in injury or damage.
• DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE.

Have a Question/Concern?

• Quality products and first-class customer service are the cornerstones of long-lasting consumer relationships. We strive toward excellence in all we do and want you to be completely satisfied with your purchase.
• Please contact our exceptional Customer Experience Agents at the email address or phone number shown below to assist you with any product questions or issues before requesting a return.
• We look forward to serving you in a friendly, efficient manner to resolve any issues you may have.
• Customer Service Email: CustomerExperience@belnick.com.
• Customer Service Phone: 866-552-2810.

Our Warranty Statement

This warranty covers manufacturing defects associated with your new product. The product is warranted from the original purchase date and to the original purchaser for normal usage, according to the below-referenced specifications and limitations.

• Non-moving metal parts are warranted for 5 years,
• Component parts including the pneumatic cylinder, control mechanism, base, and casters are warranted for 2 years.
• All other items are warranted for 1 year.

Normal usage means use in compliance with the restrictions and weight limits specified for the product. ln the absence of product-specific restrictions and weight limits, normal usage means use for no more than forty hours per week by persons weighing 250 lbs. or less. Coverage terminates if the product is sold or otherwise transferred. Repairs made by parties otherthan Belnick also void this warranty. This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence, alteration, assembly, installation, attachments, accident, vandalism, acts of nature, or any other event beyond the control of Belnick; (2)tearing, scratching, scuffing, or blemishing of leather or fabric; (3) cosmetic damage that may result from normal usage; {4) damage attributable to use by persons exceeding specified weight limits or commercial use exceeding forty hours per week; or (5) rust or other damage caused by exposure to moisture. The user assumes all risk of injury resulting from the use of this product. Liability for incidental or consequential damage is excluded. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

PARTS REQUIRED

Hardware

NOTE: Unzip liner to access the screw holes.

INSTALLATION INSTRUCTIONS

Step 1

• Attach the Headboard Wings (Part 10) to both sides of the Headboard (Part 2) using (4) M8x35mm Screws (Part A), (4) M8x1mm
• Large Lock Washers (Part B), and (4) M8x1mm
• Large Flat Washers (Part C). Tighten using M5
• Large Allen Wrench (Part M).

Step 2

• Attach the Headboard Legs (Part 4) to the Headboard (Part 2) using (6) M8x35mm Screws (Part A), (6)
• M8x1mm Large Lock Washers (Part B), and (6)M8x1mm Large Flat Washers
• (Part C). Tighten using M5 Large Allen Wrench (Part M).

Step 3

• Attach (2)M6x23mm Adjustable
• Height Glides (Part D) to
• Headboard Legs (Part 4).

Step 4

• Attach (2) M6x23mm Adustable Height Glides (Part D) to Footboard Legs (Part 3).

Step 5

• Attach Footboard Legs (Part 3) to Footboard (Part 9) using (2) M6x100mm Bolts (Part N). Tighten using M4 Small Allen Wrench (Part L).

Step 6

• Attach (2) Side Legs (Part 5) to the Left and Right Side Rails (Part 1)using (8)M6x25mm Screws (Part H), (8)M6x1mm Large Lock Washers (Part J), and (8) M6x1mm Large Flat Washers(Part K). Tighten using an M4 Small Allen wrench (Part L).

Step 7

• Attach (2) M6x23mm Adustable Height Glides (Part D) to Side Legs (Part 5).

Step 8

• Attach the Left and Right Side Rails (Part 1) to the Headboard Legs (Part 4) using (4) M8x20mm Screws (Part E). Tighten using M5 Large Allen Wrench (Part M).

Step 9

• Attach (2) M6x23mm Adjustable Height Glides (Part D) to the bottom of the Headboard Wings (Part 10).

Step 10

Attach Left and Right Side Rails to Headboard Wings using (4) M6x50mm Screws (Part F), (4) M6x1mm Small Lock Washers (Part J) and (4) M6x1mm Small Flat Washers (Part K). Tighten using M4 Small Allen Wrench (Part L).

Step 11

• Insert (4) M6x50mm Screws (Part G) through the Support Slats (Part 8) and the Center Rails (Part 7) and attach them to the Center Legs (Part 6). Tighten using M4 Small Allen Wrench (Part L).

Step 12

• Attach (2) sets of Support Slats (Part 8) to the Left & Right Side Rails (Part 1) using (8) M30 Self-Tapping Screws (Part I). Tighten using a Phillips Screwdriver (Not Included).

Customer Service Email: CustomerExperience@belnick.com I Phone: 866-552-2810

• YK-1078-BEIGE-T-GG / YK-1078-BEIGE-F-GG / YK-1078-BEIGE-Q-GG
• YK-1078-GY-T-GG / YK-1078-GY-F-GG / YK-1078-GY-Q-GG
• YK-1078-CHAR-T-GG / YK-1078-CHAR-F-GG / YK-1078-CHAR-Q-GG

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>