abode 2ARGFWVD Wireless Video Doorbell User Manual

abode 2ARGFWVD Wireless Video Doorbell

Get support visit support.goabode.com

PRODUCT OVERVIEW

Front of Doorbell

Back of Doorbell

Top of Chime

Left Side of Chime

Back of Chime

Pairing Process

1. Remove the Doorbell, Chime, Ethernet cable, USB charging cable, and Chime power adapter from the box.
2. Open the rubber flap on the back of your Doorbell and turn on the switch located beneath the charging porL Close the flap.
3. Plug the supplied Chime power adapter into a wall outlet and the Chime.
4. Connect the Chime to an available port on your router with the provided Ethernet cable. The Chime’s LED lights will turn blue.
5. Download the Abode App and go to the Devices tab or Settings menu to add a new device.

FCC Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna. .
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radionv technician for help.

ISED RSS Warning

This device complies with ISED licence-exempt RSS standard (s). Operation is subject to the following two conditions:

1. this device may not cause interference,
2.  this device must accept any interference, including interference that may cause undesired operation of the device.

ISED Radiation Exposure Statement

• This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

For detailed mounting and operating instructions go to supporLgoabode.com/docs/doorbell Abode Systems, Inc., 2625 Middlefield Road #900, Palo Alto, California 94306, United States © 2022 Abode Systems, Inc. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>