2ARGFACB Abode Color Bulb User Guide

: June 6, 2024
: abode

Table of Contents

2ARGFACB Abode Color Bulb
In the Box:
Technical Specs:
Pairing Process:
FCC Warning:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2ARGFACB Abode Color Bulb

Get support visit support.goabode.com For setup instructions, download the Abode app on:

In the Box:

Technical Specs:

Model: SKU 104062/A
FCC ID: 2ARGFACB
IC: 26939-ACB
Size: 60x60x113mm
Rated power: 9 Watts
Lumens: 800 Lumens
Base type: E26
Working voltage: 120V-60Hz
Color temperature: 1800K-6500K
Compatibility: Android 5.0+, iOS 9.0+
Life expectancy: 25,000 Hours
Communication mode: 802.11 b/g/n, 2.4 GHz

Note:

Make sure that the power is off when installing or removing the light bulb.
Do not use this product with a dimmer (e.g. a desk lamp with a dimmer switch) to avoid damaging the product
Risk of electric shock- Do not use where directly exposed to water.
Do not use in a narrow or poorly ventilated light fixture.
Not for use in totally enclosed luminaired.
Not for emergency lighting.

Pairing Process:

Remove the bulb from the box and screw into the desired socket.
Switch the light on. It should ready to connect
Download the Abode app and go to the Devices tab or Settings menu to add a new device.

FCC Warning:

Any changes or modifications not accepted approved by the party responsible for compliance equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed between the radiator and your body.

ISEDC RSS Warning:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this must accept any interference received, including interference that may cause undesired operation

ISEDC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed between the radiator and your body.