abode Revolve Round Bowl & Drainer Instruction Manual
- June 7, 2024
- abode
Table of Contents
abode Revolve Round Bowl & Drainer
Revolve Round Bowl & Drainer
Fitting type: Undermount or Inset
Sink handing: Not handed
Finish style: Satin/Brushed steel
- Min. base un i t ( mm ): 800 together (.500 individually)
- Packaged s ize L x W x D : 460 x 460 x 230mm
- S upplied b o xed or sleeved: Boxed
- Boxed weigh t: 3.68 kg
- S ink only weigh t: 2.16 kg
- Durable 304 stainless steel construction throughout
- Supplied with all parts required
- Easy clean bowl curves
- Can be fitted as undermount or inset
- Practical basket waste supplied
Included Parts
| |
|
---|---|---|---
1 xAXl005R (m)
90mm ( 1.5″) Basic manual basket strainer waste-short belt – Multi ray
|
1X A1112(m)
1 x 60mm (non sealing bsw)
|
1 x AXI006 (m)
Rectangular overflow pipework
|
1 x AX4043 (m)
Fitting & care instructions & data sheet -st/st inset/undermount
| |
2 X AX 1113 (m)
Self adhesive strip seal (3 x 7 x 1800mm
|
1 xAX1114(m)
Inset fixing clips x 10
|
1 x AX4043 (m)
Undermount stainless steel fixing clips x8
Materials and workmanship warranty summary:
- Sink materials & workmanship 10 years.
- Waste kits 1 year.
- Connecting pipework I year.
Care instructions:
- Clean the products regularly using soapy water and a nan abrasive c loth, regular cleaning will prevent the build up of lime scale and dirt.
- Avoid contact with corrosive or abrasive substances.
- After cleaning rinse thoroughly with clean water then dry.
- For more detail see supplied booklet or www.abodedesigns.co.uk
Product dimensions and installation information
Note: symbol indicates position of acoustic pad on stainless products.
*Important, fabricator / installer notes for undermount & flushmount sinks:
The cut out size indicated is aligned with outside edge of the bowl top radius
(see example below).
You should confirm with your client if the worksurface cutout is to be cut
flush, inside or outside this suggested perimeter shape & size.
If you create the cutout smaller or larger than the indicated size then the fit of the accessories may be affected arid should be physically checked.
General
All details are provided in good faith but do not include the tolerances of the material or manufacturing process.
We request that. a test. cutout is made m scrap timber and ,checked against the actual sink to be installed before ,committing to cutting the final worksurface.
Abode can not accept liability for problems or costs incurred by failure to follow this request.
Note: the dimensions on ceramic fireclay products are subject to wider tolerances due to the nature of this natural material al and the firing g process.
CAD cutout files can be downloaded from www.abodedesigns.co.uk
Bowl details
(sizes in mm unless specified otherwise)
Bowl 1 (typically main bowl):
Bowl 1 size L x W x D (mm): 380 x 380 x 1165
Bowl 1 construction: Pressed, 0.60mm
Bowl. 1 floor radius (mm): 40
Bowl 1 Wastehole diameter (mm): 90
Bowl1 1 overflow: Slotted, std equal pattern
Bowl, 1 texture: Brushed stainless
Bowl 1 a x. volume liters: 12.,80
Bowl 2 (typically ‘1/2 or 3/4. bowl):
Bowl 2 size:·8 L x W x D (mm): 380 x 380 x 46
Bowl 2 construction: pressed, 0.60mm
Bowl 2 floor radius (mm): 10
Bowl 2 Wastehole diameter (mm): 60
Bowl 2 overflow: N/A
Bowl 2 texture: Satin/Brushed stainless
Bowl 2 a x. volume (liters): N/ A
Bowl 3:
Bowl 3 size L x W x D (mm): N/A x N/A x N/A
Bowl 3 construction: N/ A, N/ Amm
Bowl 3 floor radius (mm): N/ A
Bowl 3, Wastehole diameter (mm): N/ A
Bowl 3 overflow: N/ A
Bowl 3 texture: N/ A
Bowl 3 apx volume liters: N/ A
Product order code: {AW5129)
21/12/2018 – This sheet is a summary of the product information full details are available on request. errors & omissions excepted, details are subject to change without prior notification.
References
- Abode Shop | Kitchen Sink, Filters and Tap Accessories
- Abode | Kitchen Sinks, Taps and Beautiful Bathroom Taps
- Abode | Kitchen Sinks, Taps and Beautiful Bathroom Taps
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>