abode Xcite 1.5 Bowl & Drainer Instruction Manual

: June 7, 2024
: abode

Table of Contents

Xcite 1.5 Bowl & Drainer
Included parts
Recommended accessories
Product dimensions and installation information
General
Bowl details
Documents / Resources

abode Xcite 1.5 Bowl & Drainer

a close up of a box

Xcite 1.5 Bowl & Drainer

Fitting type: Inset
Sink handing: Reversible
Finish style: Grey metallic granite

Min. base unit (bowl, tap & overflow only): 600 mm
Packaged size L x W x D: 1100 x 610 x 285mm
Supplied boxed or sleeved: Boxed – brown
Boxed weight: 22.26 kg
Sink only weight: 17.18 kg

Durable matt finish granite composite construction throughout
One a half bowl design for maximum practicality
Softened square edges for a sharp but easy clean look
Reversible drainer position for maximum flexibility
Stainless steel wastes and pipework Included

Included parts

| a
close up of a device | a close up of a
sign |
---|---|---|---

1 x AX1052 (m)
2 x 90mm std bsw, std o/flow &
pipework

|

1 x AX1033 (m)
Composite inset fixing clips x 8

|

1 x AX4025 (m)
fitting instructions for AX1052
plumbing kit

|

1 x AX4004 (m)
Fitting & care instructions & data sheet
– coloured inset

Recommended accessories

a close up of a cage | a close up of a
logo | shape, arrow | | a
close up of a card
---|---|---|---|---

1 x AX2503
High & Dry drainer rack – White and
grey

|

1 x AX2500
Silicone drainer mat 320 x 320mm

|

1 x AX301l
Bowl mat 27 4 x 334 RS

|

1 X AX2017
Glass Chopping Board 500x280mm
(475) – Black Gloss

|

1 X AX2023
Glass Chopping Board 500x280mm
(475) – White Gloss

All accessories can be purchased directly from www.abode- shop.co.uk or phone 01226 283434

Materials and workmanship warranty summary:

Sink materials & workmanship 10 years.
Waste kits 1 year .
Connecting pipework 1 year .

Care instructions:

Clean the products regularly using soapy water and a non abrasive cloth. regular cleaning will prevent the build up of lime scale and dirt.
Avoid contact with corrosive or abrasive substances .
After cleaning rinse thoroughly with clean water then dry .
For more detail see supplied booklet or www.abodedesigns.co.uk

Product dimensions and installation information

Note: symbol indicates position of acoustic pad on stainless products.

diagram, engineering drawing

diagram

Additional notes: Repeated release of boiling hot water directly into coloured sinks can in extreme cases cause crazing and even cracking. Therefore we recommend great care is taken not to release the water directly on to the sink surface at full temperature.
Overall product size: 1000 x 500 x 200 corner radius 10mm

Taphole(s) detail: 2 x 0 35m, Part drilled for drill guide
Compatibility with large square taps:
Wastehole(s) detail (mm): 90 / 90 / N/ A (nb. 90mm wastes accept a waste disposal unit)
Min. base unit (refers to space required for bowl, tap and overflow only): fits 600mm carcass
Min. Recessed fitting width: required (bowl(s), tap and overflow: 545mm
*Worktop cut out size: 976×476 corner radius 10mm, for .DXF cut flies please see www.abode.eu
Min. & Max worktop depth or clip depth reach range: 27 – 45mm
Fitting temple supplied? No, use cut out instructions as supplied
Dishwasher under drainer? Distance from top of worktop to underside of the drainer 33mm

*Important, fabricator / installer notes for undermount & flushmount sinks:

The cut out size indicated is aligned with outside edge of the bowl top radius ( see example below).
diagram
You should confirm with your client if the worksurface cutout is to be cut flush, inside or outside this suggested perimeter shape & size.
If you create the cutout smaller or larger than the indicated size then the fit of the accessories may be affected and should be physically checked

General

All details are provided in good faith but do not include the tolerances of the material or manufacturing process.

We request that a test cutout is made in scrap timber and checked against the actual sink to be installed before committing to cutting the final worksurface.

Abode can not accept liability for problems or costs incurred by failure to follow this request.

Note: the dimensions on ceramic fireclay products are subject to wider tolerances due to the nature of this natural material and the firing process.

CAD cutout files can be downloaded from www.abodedesigns.co.uk

Bowl details

(sizes in mm unless specified otherwise)

Bowl 1 (typically main bowl):

Bowl 1 size L x W x D (mm): 350 x 420 x 180
Bowl 1 construction: Moulded, 10.00mm
Bowl 1 floor radius (mm): 10
Bowl 1 Wastehole diameter (mm): 90
Bowl 1 overflow: None
Bowl 1 texture: Matt textured
Bowl 1 apx. volume (liters): 16.00

Bowl 1 (typically main bowl):

Bowl 2 size L x W x D (mm): 150 x 350 x 105
Bowl 2 construction: Moulded, 11.00mm
Bowl 2 floor radius (mm): 10
Bowl 2 Wastehole diameter (mm): 90
Bowl 2 overflow: Circular, 30mm diameter
Bowl 2 texture: Matt textured
Bowl 2 apx. volume (liters): 3.60

Bowl 3:

Bowl 3 size L x W x D (mm): N/A x N/A x N/A
Bowl 3 construction: N/ A, N/Amm
Bowl 3 floor radius (mm): N/ A
Bowl 3 Wastehole diameter (mm): N/A
Bowl 3 overflow: N/A
Bowl 3 texture: N/A
Bowl 3 apx. volume (liters): N/ A

Product order code: {AW3162)

21/12/2018 – This sheet is a summary of the product information full details are available on request. errors & omissions excepted, details are subject to change without prior notification. www.abodedesigns.co.uk

icon