abode Vista 1.5 Bowl Instruction Manual

: June 7, 2024
: abode

Table of Contents

Stainless Steel:
Included Parts:
Recommended Accessories:
Product dimensions and installation information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

abode Vista 1.5 Bowl Instruction Manual

Stainless Steel:

Fitting Type: Undermount
Sink Handling: Reversible
Finish Style: Brushed Steel

Min, base unit (mm): 600 (excluding fixings)
Packages size L x W x D: 640 x 500 x 230 mm
Supplied boxed or sleeved: Boxed
Boxed Weight : 4.72 KG
Sink only Weight: 2.96 KG
Durable 304 stainless steel construction throughout
Supplied with all parts required
Easy clean bowl curves
Practical basket waste supplied
Fits in a 600 base cabinet excluding fixing clips

Included Parts:

2 x AX1005R (m)
90mm (1.5″) Basic manual basket
strainer waste – short bolt – Multi ray
1 x AX1006 (m)
Rectangular overflow pipework
1 x AX4039 (m)
Fitting & care instructions & data sheet
– st/st undermount
1 x AX1108 (m)
Undermount stainless steel fixing clips
x 8

Recommended Accessories:

All accessories can be purchased directly from
www.abode-shop.co.uk or phone 01226 283434

Materials and workmanship warranty summary:

Sink materials & workmanship 10 years.
Waste kits 1 year.
Connecting pipework 1 year.

Care Instructions:

Clean the products regularly using soapy water and a non abrasive cloth, regular cleaning will prevent the build up
of lime scale and dirt.
Avoid contact with corrosive or abrasive substances.
After cleaning rinse thoroughly with clean water then dry.
For more detail see supplied booklet or www.abodedesigns.co.uk

Product dimensions and installation information

diagram, engineering drawing
diagram
diagram, schematic

Note: Symbol indicates position of acoustic pad on stainless products.

Additional Notes: Important: Please check cut out details carefully before cutting worktops, size shown is flush to bowl edge.

Overall product size	590 x 445 x 180 corner radius 80mm
Taphole(s) detail:	None

Compatability with large square taps:
Wastehole(s) detail (mm):| 90 / 90 / N/A (nb. 90mm wastes accept a waste disposal unit)
Min. base unit (refers to space required for bowl, tap and overflow only):| fits 600 (excluding fixings)mm carcass
Min. Recessed fitting width:| required (bowl(s), tap and overflow: 545 mm
Worktop cut out size| 550×405 corner radius variesmm, for .DXF cut files please see www.abode.eu
Min. & Max worktop depth or clip depth reach range| 0 – 5mm
Fitting temple supplied?| No, use cut out instructions as supplied
Dishwasher under drainer?| Distance from top of worktop to underside of the drainer n/amm

Bowl details: (sizes in mm unless specified otherwise)

Bowl 1 (typically main bowl):

Important, fabricator /installer notes for undermount & flushmount sinks:
The cut out size indicated is aligned with outside edge of the bowl top radius (see example below).

You should confirm with your client if the worksurface cutout is to be cut flush, inside or outside this suggested perimeter shape & size.
If you create the cutout smaller or larger than the indicated size then the fit of the accessories may be affected and should be physically
checked.

General:
All details are provided in good faith but do not include the tolerances of the material or manufacturing process.
We request that a test cutout is made in scrap timber and checked against the actual sink to be installed before committing to cutting the
final work surface. Abode can not accept liability for problems or costs incurred by failure to follow this request.

Note: The dimensions on ceramic fireclay products are subject to wider tolerances due to the nature of this natural material and the firing process. CAD cutout files can be downloaded from.
www.abodedesigns.co.uk