Bright 023278 DAB Radio Instruction Manual
- June 3, 2024
- Bright
Table of Contents
Bright 023278 DAB Radio
Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com
SAFETY INSTRUCTIONS
WARNING!
- Do not expose the product to rain or moisture – risk of fire and/or electric shock.
- Never open the case – risk of electric shock. Service must only be carried out by qualified personnel.
- Do not allow the batteries to remain in the battery compartment too long. Remove the batteries to avoid leakage and damage.
- Do not expose the appliance to extreme temperatures or high humidity to ensure normal functionality and a long life.
- Never place the appliance in the bathroom, next to stoves or radiators.
- If the appliance does not work correctly, take it to the nearest service centre. Do not attempt to repair it yourself.
DESCRIPTION
- Info/Menu
- Mode
- Scan
- Alarm
- Preset/Set
- Power
- Volume +
- Select
- Right Arrow
- Volume –
- Left Arrow
- 3.5mm connection
- Power connection
- Antenna
- LCD display
- Speaker
- Battery lid
FIG. 1
USB cable supplied.
TECHNICAL DATA
- Battery 3xAAA
- Speaker 4 ohm
- Output 1.2 W
USE
BATTERY
Open the battery cover and insert the batteries in the direction shown in the
battery compartment.
USB CABLE
Connect the USB cable to a mobile unit’s USB port or a USB charger for a wall
socket.
START/SWITCH OFF
- Extend the antenna and angle it for the best reception.
- Start the radio.
- Press the Power button once. Press the Power button once more to activate standby mode.
- Press and hold the Power button to switch off.
- Press the Mode button to switch between FM and DAB.
VOLUME
- Press Vol+ to increase the volume Vol- to lower the volume.
- The speakers are shut-off when the 3.5 mm connection is used.
DAB MODE
Automatic station search
- Press Mode and select DAB mode.
- The first time the radio is started, it selects automatic DAB mode and starts to search directly for DAB stations. Let the search process finish.
- Press the arrows to got to the required station.
- Press Scan to perform a new search.
Manual station search
- Press Mode and select DAB mode.
- Press and hold Info/Menu until Manual tune is shown on the display. Press Select to confirm.
- Use the left and right arrows to browse through the stations (5A-13F). Press Select to confirm.
FM RADIO
- Press Mode and select FM mode.
- Press Scan for automatic frequency search.
- Press Scan again to find the next station.
- Press and hold Scan to search backwards to the previous station.
- Press the arrows to set the station manually.
- Press Select to switch audio mode between mono and auto mode.
PRESET STATIONS
20 different stations can be saved. A saved frequency is erased when a new one in saved in its place.
- Set the required frequency in DAB or FM mode.
- Press and hold Preset until Preset Empty is shown on the display. Use the arrows to select the station location (1-20).
- Select the station number and confirm with Select. Once the station has been saved the saved frequency is shown instead of Preset Empty.
- Press the Preset to listen to the station. Browse between the station numbers with the arrows. Confirm with Select.
ALARM
- Start the radio.
- Press Alarm. Use the arrows to make the following selections, while the display flashes, confirm with select:
- on/off
- time hour
- time minutes
- alarm mode: Daily/Once/Weekends/ Weekdays/
- type of alarm; Beeper1/FM/DAB/ Beeper2
- alarm volume
Snooze
- When the alarm sounds, press Select to snooze for 9 minutes.
- The Snooze function is repeated until Alarm is pressed in.
FACTORY RESET
- In DAB or FM mode. Press and hold Info/ Menu.
- Use the arrows to scroll to Factory Reset. Select Yes. Confirm with Select.
- All settings are reset to the factory settings.
DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer. Conforms to the following directives, regulations and standards:
| Directive/Regulatio n | __Harmonised standar d |
|---|---|
| RED 2014/53/EU | EN 62368-1:2014+A11, EN 62479:2010, EN 55032:215+A1, EN |
55035:2017+A11, EN IEC61000-3-2:2019+A1, EN 61000-3-3:2013+A2, ETSI EN
303345-1 V1.1.1, ETSI EN 303345-3 V1.1.1, ETSI EN 303345-2 V1.1.1
RoHS 2011/65/EU + 2015/863| EN 50581:2012
This product was CE marked in year
