AIRPOP HALO Active Smart Mask User Guide
- June 6, 2024
- AIRPOP
Table of Contents
AIRPOP HALO Active Smart Mask
About this product
Install app
Search for ‘Air pop’ or scan the QR code in Apple App store or Android App store,
Pair Halo and get started
Open the app, register or log in according to the prompts, and search for only
masks.
When the halo blue light starts to flash, blow air into halo from the inside
of the enclosure to complete the pairing, and then the work can start
.
Change battery
When the app indicates that the halo battery will be exhausted, open the halo
back cover from cover, take out the old button battery, put in the new button
battery, and complete the replacement
To split the Halo, use your fin gemail to hold the back cover and upper ring(
Please note do not exceed the blue aera)
Halo product Performance failure table
| Name | Performance failure |
|---|
Halo
|
Failure o f f, melons listed i… tht ma.Liu.I
Unable to.syr11:h tOAllt ‘with the:specififddt<riet
Dltrlilltf’dl.ll tO.stN ewtalornv, faao,s
Ring| Damage due to structural or material factors
Notes on the use of halo
- Do not immerse the Halo in liquid;
- Keep away from fire sources, strong magnetic field, chemicals and other dangerous places to avoid danger or product damage;
- Halo should be kept in a cool and dry place, away from direct sunlight;
- Keep all small parts of the mask and Halo away from children
SPECIFICATION
- Model: HALO
- Battery Type: CR1632 3V Lithium manganese battery
- Weight: 6.3 g
- Battery Capacity: 139mAh
- Shell material: PC
- Wireless: Bluetooth4.0BLE
- Working temperature: -1crc-45•c
- Color: Silver Grey
- CMIIT ID: 2017DP5968
- Executive Standards: Q31/0115000400C004-2017
- Equipment requirements: Android4.4 / iOSS.O or above with BlueTooth4.0
We, STRAX GmbH, declare under our sole responsibility, that the product‘
ACTIVE SMART MASK’ conforms with the provisions of the following Directives:
2014/53/EU. Distributor: STRAX GmbH, Belgische Allee 52+54, 53842 Troisdorf,
Germany, www.strax.com
The full text of the EU Declaration of Conformity is available at the
following
internet address: https://www.strax.com/compliance
For Europe
The frequency band of operation 2,400 to 2,483.5 MHz
Bluetooth: Maximum transmit power less than 20 dBm/Mhz EIRP Bluetooth low
Energy: Maximum power spectral density less than 10 dBm/Mhz EIRP
The name and content of harmful substances in the product
This form is prepared according to SJ/ t11364
O means that the content of the harmful substance in all homogeneous materials
of the component is within the limit specified in GB/T 26572 X indicates that
the content of the harmful substance in at least one homogeneous material of
the component exceeds the limit requirement specified in GB/ T 26572.
Copper alloy contacts of halo body contain trace lead The product meets the
requirements of China’s ROHS environmental protection; there Is no mature
technology ln thewortd to replace or reduce the lead content In copper and
copper alloy.
The environmental protection .service life of the product refers to the safety
period that the harmful substances or elements contained In the product will
not leak under normal use conditions@
FCC
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC rules. These limits are
designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generated uses, and
can radiate radio frequency energy and , if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.