bright starts 13069-MEES Playful Paradise Portable Swing User Manual

bright starts 13069-MEES Playful Paradise Portable Swing

Product Information

Specifications:

• Product Name: Playful Paradise Portable Swing
• Manufacturer: Bright Starts
• Battery Requirement: (4) size C/LR14 (1.5V) alkaline batteries (not included)

Product Usage Instructions

Parts Assembly:
Refer to the parts list provided in the manual for assembling the swing frame, foot assemblies, footrest tube, backrest tube, seat pad, and a toy bar with toys.

Using the Recline Function:
Adjust the recline function of the swing to provide a comfortable position for your baby while swinging.

Using the Swing Control Module:
Follow these steps to operate the swing control module:

• Press the Power Switch to turn on the swing.
• Adjust the swing speed using the Speed Selector with 5-speed settings.
• Push the seat gently to initiate the swing motion.
• Set the Swing Timer to automatically turn off the swing after 30, 45, or 60 minutes, or use the default time of 90 minutes if no setting is chosen.
• Control the volume of music using the Volume Control Switch.

FAQ:

• Q: What type of batteries does the swing control module require?
  A: The swing control module requires (4) size C/LR14 (1.5V) alkaline batteries.

• Q: How many speed settings are available for the swing?
  A: The swing provides 5-speed settings for adjusting the swinging motion.

IMPORTANT SAFETY INSTRUCTION

IMPORTANT!
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

WARNING

• FALL and STRANGULATION HAZARDS: Infants have suffered head injuries falling from swings and have been strangled in straps.
• ALWAYS use the restraint system. Adjust to fit snugly.
• STOP using the product when the infant attempts to climb out (approximately 9 months).
• DO NOT use this product once your child can sit up unaided or weighs more than 9 kg/20 lbs. DO NOT use this product if your child weighs less than 3kg/6 lbs.
• Stay near and watch the baby during use. This product is not safe for sleep or unsupervised use. If the baby falls asleep, remove the baby as soon as possible and place the baby on a firm, flat sleep surface such as a crib or bassinet.
• Never let the child sleep in this product.
• DO NOT move or lift this product with the baby inside it. Never lift a product using a toy bar as a handle.
• ALWAYS place the product on the floor. NEVER use this product on an elevated surface (e.g. a table).
• NEVER attach any additional strings or straps to the product or toy bar.
• SUFFOCATION HAZARD: Young infants have limited head and neck control. If the seat is too upright, the infant’s head can drop forward and compress the airway.
• ALWAYS keep the swing seat fully reclined until the infant is at least 4 months old AND can hold up the head without help.
• SUFFOCATION HAZARD: Babies suffocate when seats are tipped over on soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.

Prevent Serious Injury or Death

• NEVER leave the child unattended.
• To avoid injury ensure that children are kept away when unfolding and folding this product.
• Do not let children play with this product.

IMPORTANT

• Adult assembly is required.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine the product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Battery Information

The swing control module requires (4) size C/LR14 (1.5V) alkaline batteries (not included).

CAUTION:
Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes:

• Always keep batteries away from children.
• Never mix old and new batteries or batteries of different brands or types.
• Always replace the entire set of batteries at one time.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dispose of used batteries immediately.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
• Do not dispose of products or batteries in a fire, batteries may explode or leak.

This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

Care and Cleaning

• Seat pad – Remove from frame. Fasten the buckles on the seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, low heat.
• Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame – Wipe the metal frame with a soft, clean cloth and mild soap.
• Storage – When putting the swing away for storage, always store it in a dry location, away from any heat sources, and out of the sun.

Parts List

No.| Qty.|  | Description|
---|---|---|---|---
1| (1)| Left Swing Frame Assembly
2| (1)| Right Swing Frame Assembly
3| (1)| Front Foot Assembly
4| (1)| Rearfoot assembly
5| (1)| Footrest tube
6| (1)| Backrest tube
7| (1)| Seat pad
8| (1)| Toy bar with toys

Not Included

Assembly Instruction

Using And Operating Instruction

Using The Seat Restraint

Using the Recline Function

Using the Swing Control Module

• Press the Power Switch to power the swing.
• The Speed Selector provides 5-speed settings. To start the swing function, press the button until the flashing LED displays the desired setting is changed during the swing motion, she ED oil nash during spied speed adjustment.
• Use the Swing Timer to turn OFF the swing automatically. Press the button to select the desired timer setting of 30, 45, or 60 minutes. If a timer setting is not chosen, the swing uses a default time of 90 minutes for auto-shutoff. To use the swing function after shutoff, press the Speed Selector.
• Push the Volume Control Switch as needed to turn off or adjust the volume for music.

Storage And Travel

FCC Statement

FCC Statement/CAN ICES-3 (B)/NMB-3(B)
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Find us on Facebook and Instagram @brightstarts.

• MANUFACTURED FOR • FABRIQUÉ POUR Kids2 * Kids II ©2023 KIDS2, INC. www.kids2.com/help.
• KIDS2, INC. ATLANTA, GA USA 30305 • 1-800-230-8190 IMPORTED BY • IMPORTÉ PAR
• SUMMER INFANT (USA) INC. 1275 PARK EAST DRIVE, WOONSOCKET, RI 02895 USA • 1-401-671-6551
• KIDS2 CANADA CO. PO BOX 54059, RPA LAWRENCE PLAZA, TORONTO, ON. M6A 3B7
• KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
• KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081
• KIDS2 UK LTD. GROUND FLOOR, SUITE A1A, BREAKSPEAR PARK,
• BREAKSPEAR WAY, HEMEL HEMPSTEAD, HP2 4TZ • +44 01582 816 080
• KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS • +31 20 2410934
• KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488

brightstarts.com.

MADE IN CHINA.

References

• Bright Starts™ – Kids2, LLC
• Kids2 Contact Us – Kids2, LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>