APsystems 4300805302 25A AC Connector Installation Guide
- June 3, 2024
- APsystems
Table of Contents
APsystems 4300805302 25A AC Connector
Tools:
Cross screwdriver, wire striper, solid wrench, or monkey wrench.
Verify the AC connector
Type is 25A AC Male Connector (EN,5-wire) or 25A AC Female Connector (EN,5-wire).
25A AC Male Connector(EN,5-wire)
25A AC Female Connector(EN,5-wire)
Wire Stripping
- Wire gauge： 5×2.5mm² (14AWG) or 4×2.5mm² (14AWG~12AWG)
- Cable OD： 10mm~13mm
- Wire stripping size (mm ): Earth wire is supposed to be longer than Live wire and Neutral wire.
Wiring cables to the AC connectors
- Set the parts on the cable according to the order of 1→2→3→4.
- Crimp wires: the plastic core of the connector is printed, please wire according to the print, ( If the 4-wire cable can be empty), and screw twisting torque 0.8 + / – 0.1N. m.
- Push Housing into the Body until hearing the click sound.
- Insert Seal and Clamp Finger into Body, then tighten the nut, torque m 4.0 +/ – 0.5N .m.
- Installation of cable end female connector is the same as a male connector.
APsystems
8701 N. Mopac Expy, Ste 160, Austin, TX 78759 Tel:
844-666-7035
apsystems.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>