Maxell EB-95 Stereo Earphone, Black User Manual

Maxell EB-95 Stereo Earphone, Black

Specifications

• BRAND: Maxell
• MODEL NAME: EB-95 Stereo Earbuds
• COLOR: Black
• FORM FACTOR: In Ear
• CONNECTIVITY TECHNOLOGY: Wired
• CORD: 4″ cord with a silver-plated
• PLUG: 3.5mm L-plug
• CONNECTOR: 3.5mm Silver Plated versatile connector
• INCLUDED COMPONENTS: Earphone
• SPECIAL FEATURES: Lightweight
• COMPATIBILITY: iPhone, iPod, MP3 players, gaming devices and much more

Introduction

For use with smartphones, tablets, laptops, and other portable sound devices, inexpensive stereo earphones are the best option. Plastic EB-95 earbuds that are lightweight reproduce sound dynamically from all sources. A 3.5mm L-plug with silver plating is on the 4″ chord.

HOW TO USE

Stereo headphones are earphones that reproduce unique sounds from the left and right speakers, or speakers, separately. A left channel is used for the left speaker output and a right channel is used for the right speaker output when using stereo headphones.

HOW TO OPERATE ON PC

• Select “Open Sound Settings” from the context menu when you right-click the sound icon in the taskbar. It’ll bring up a new window. accessing Sound Settings.
• You’ll notice a selection with the title “Choose your output device” under “Output.” Sound Output Preferences.
• Select the paired headset. changing the output device to the headset.

HOW TO FIX EARPHONES WITH NO SOUND

• Activate the earbuds’ power supply.
• Activate the audio device or raise the volume.
• Clear out the earbuds.
• Reconnect wired earphones after unplugging them.
• With wireless earbuds, test the Bluetooth connection.

HOW TO TEST STEREO MIX

Type Control PanelHardware and Sound into the Run prompt, and then press Enter. Select the Playback tab under Sound. Set the stereo mix as the default playback device by performing a right-click on it. Right-click on it and run a test to ensure it is functioning.

HOW TO FIX EARPHONES WIRES

• To reveal the copper, sand the wires. Sand the thin enamel coating off of each wire, including the ground wire, before soldering.
• Connect by twisting and soldering.
• Electrical tape should be used to properly wrap each wire.
• Over the headphone cord, position and heat the heat-shrink tubing.

HOW TO CLEAN HEADPHONE JACK

Lint could become lodged in the headphone jack of your Android or iPhone after placing the device in your pocket. The best way to delicately remove these textile fibers without causing any damage is with paper clips and tape.

Frequently Asked Questions

The stereo effect is what?

the sound-specialization technique that involves using many independent microphones to send audio to multiple loudspeakers via multiple channels. You can achieve an excellent stereo impression by placing the speakers of the hi- fi on either side of the television.

What do earphones’ stereo modes do?

With stereo, sound is sent left and right across several channels. You can use this to judge distance, direction, and focus. It naturally corresponds to your left and right ears.

What determines whether your headphones are stereo?

A device will typically be mono if it has an output jack marked “EARPHONE,” while a device with an output jack marked “HEADPHONE” will typically be stereo.

Why do earbuds sometimes stop working on one side?

Depending on the audio settings on your headset, it might only play in one ear. So make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

What distinguishes hands-free from stereo?

The main high-quality playback component of the headset is the “Stereo” device, while the “hands-free” component is a monophonic playback component of lower quality.

Why won’t my headset work?

A broken audio cord is a frequent reason for headphone problems. Put on your headphones, turn on your favorite source of audio, and gently bend the wire at two-centimeter intervals from one end to the other to see if it is damaged.

Why do my wired headphones not produce any sound?

You might not be able to hear sounds from your headphones if the audio jack is damaged or broken, the wire is exposed, or both. Verify the condition of your audio jack. Check to see if your cable is broken. The headphones could be harmed even though you cannot physically see any damage.

How is stereophonic audio created?

This is typically accomplished by using two independent audio channels using a set-up of two loudspeakers (or stereo headphones) that gives the sense that sound is coming from different directions, as it would in real life.

Mono or stereo, which is louder?

Mono is not louder than stereo. Stereo, on the other hand, may appear louder because it simulates width and distance by sending two distinct channels to the speakers. However, if you compare them on speakers with same volume settings, they ought to be at a level of equal decibels (dB).

What distinguishes stereo from mono?

Mono audio only has one channel, whereas stereo audio has two channels. This is the main distinction between mono and stereo audio. Additionally, mono audio keeps all sound in a single channel while stereo divides sound into left and right channels. Typically, M & S stand in for them, respectively.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>