Maxell SS-TW003B02 jelleez True wireless User Manual

June 5, 2024
Maxell

Maxell SS TW003B02 jelleez True wireless

JELLEEZ-TW
FCC ID: WKA-SS-TW003B02
User Manual

Specification:

Battery capacity (600mAh)

Charging Box Output Voltage : DC 5+-0.25V 50mA*2
Charging Box Input Voltage : DC 5+-025V to
Battery Capacity :

Earbud:50mAh/3.N Polymer lithium battery. Charging Box:600 mAh/3.N Polymer lithium battery.

Music Time: Monaural Earbud with Full Electricity 5.511, Consuming All the Electricity of the Charging Box Up to 20H
Standby Time: 74h
Call Time:5H
Charging Time: Charging the Earbuds 1.5-2H, Charging the BatteryCase 2-2.5H
Bluetooth Version: 5.0V

Charging the charging case:

Maxell SS TW003B02 jelleez True wireless - Fig

Conned the USB charging cable to a computer USB port and the Micro USB plug to the charging port of the device. The LED light flashes blue rapidly. It takes around 2 hours to fully charge. When the battery is fully charged, the LED light will stay blue.
The charging case can charge the earbuds when It is charged.
Charging the earbuds:
The Red LED light on the earbuds turns on while the earbuds are charging.
Put the earbuds into the charging case (please put the “right” unit in the slot with AR” mark, and put the left” unit in the slot with the “L” mark) for automatic charging. The earbud’s red LED light turns on while the earbuds are charging. It takes around 2 hours to fully charge. When the battery is fully charged, the LED light will turn blue. 1 minute later the LED light will turn off.
When both earbuds are fully charged, the charging case will turn off the charging function automatically and turn to standby.
The function instruction

Maxell SS TW003B02 jelleez True wireless - Fig1

  1. Power on
    Hold the Power Button of the right and left unit for 3 seconds to power on, the LED light will flash red and blue alternately.

  2. Left and right unit pairing
    After power on, the Left and right units will automatically pair. Once paired successfully, you will hear an indication voice “Connected”, the right LED light will flash red and blue alternately, and the left LED will flash blue slowly. You just need power on the two units and pairing will be automatic.

  3. Pairing with device
    Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the “JELLEEZ- TW” from the list of available Bluetooth devices. If required, enter the password ‘0000’ to confirm & finalize the pairing.

  4. Calling
    Both units support voice calls.

  5. The right and left earbuds can be used independently

  6. The Power Button function
    Power on Hold the Power Button of the right and left units for 3 seconds to power on.
    Pairing: Automatic pair of the two units.
    Reject incoming call: Hold the Power Button for 2 seconds to reject an incoming call.
    Play/Pause: Short press any Power Button to pause playing music during music play.
    End a call: Short press any Power Button to end a call while calling.
    Redial last number : Press 3 times any Power Button to redial the last number.
    Previous track: Press 2 times L Power Button
    Next track: Press 2 times R Power Button

WARRANTY INFORMATION:

Maxel I warrants this product to be free from all defects for a period of 90 days from the date of original purchase. This Warranty does not apply to normal wear or damage due to accident, abnormal use, misuse, or neglect. This Warranty only applies to personal and individual use of the product and not for commercial, institutional, or any other use. Any defective item will be replaced, at no charge, upon reasonable confirmation by Maxell of its defective condition, if returned with proof of purchase to an authorized Maxell dealer or directly to Maxell Warranty Replacement, 3 Garret Mountain Plaza, Suite 300, Woodland Park, New Jersey 07424. Neither Maxell nor any authorized Maxell dealer shall be liable for consequential damages arising from this Warranty unless otherwise provided by law.

FCC INFORMATION:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals