ION Audio Portable Bluetooth Speaker Instruction Guide
- October 27, 2023
- ION Audio
Table of Contents
ION Audio Portable Bluetooth Speaker
Specifications
- BRAND: ION Audio
- DYNAMIC POWER: 40 watts
- AUX INPUT: 5mm
- ITEM WEIGHT: 98 pounds
- PRODUCT DIMENSIONS: 46 x 8.54 x 11.42 inches
Introduction
A robust 4-inch 2-way speaker produces lively music, and 40 watts of dynamic power increases volume. Any Bluetooth-enabled device may easily connect to and send music to this portable Bluetooth Speaker; a 1/8-inch (3.5mm) auxiliary input is also available for non-Bluetooth devices. Three brilliant colors—Red, Green, and Blue—are projected from a sound-reactive light dome and LED grille, and the lights even change pattern and pulse in rhythm with the music. Multiple vocal effects, such as Robot, Echo, and many more, are available for endless party fun. A high-quality microphone is also included, and there are two microphone inputs for duet performances. This Bluetooth Speaker runs handily off 8 C-cell batteries or the accompanying AC adaptor, making it the ideal portable solution for events on the go.
BOX CONTENTS
- Party Rocker Max
- Microphone with Cable
- 1/8” Stereo Aux Cable
- Power Cable
- QuickStart Guide
- Safety & Warranty Manual
SUPPORT
For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit ionaudio.com.
RECHARGEABLE BATTERIES
Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this battery has a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years. Here are some recommendations for getting the longest life from the internal battery.
General Usage Fully charge the battery before using it.
Charge the battery completely after each use.
Storage **** For best product longevity, do not store at exceedingly hot (greater than 90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures.
It is acceptable to leave your sound system plugged in. This will not overcharge the battery. If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity.
Repair ** If the battery fails to charge, check your fuse near the power cable input. If your fuse is intact and it still will not charge, contact ION Audio at ionaudio.com**.
Disposal **** Bring the unit to a recycling center or dispose of in accordance with local ordinances.
QUICK SETUP
- Make sure all items listed under Introduction > Box Contents at the beginning of this guide are included in the box.
- Read safety instruction booklet before using the product.
- For optimal performance, place Party Rocker Max in the center of the room so it is unobstructed by walls, furniture, etc.
- Turn down the Master Volume on the Party Rocker Max.
- Turn on Party Rocker Max.
- Connect your music player with an audio cable or Bluetooth. (see Connecting with a Bluetooth Device for more details on this)
- Adjust the volume on your music player and on Party Rocker Max as needed.
- Adjust the Light Mode buttons on Party Rocker Max as needed.
- Turn off Party Rocker Max when not in use.
CONNECTION DIAGRAM
Items not listed under Introduction > Box Contents are sold separately.
FEATURES
FRONT PANEL
- Auxiliary input: This stereo 1/8” input can be used to connect a smartphone, MP3 player, or another audio source.
- Microphone Inputs with Volume Control (1/4”): These mono inputs accept 1/4” inputs such as a microphone, guitar, or another musical instrument.
- Power/Charge LED: Indicates various states of activity on Party Rocker Max.
- Solid Green LED: Party Rocker Max is powered on.
- Solid Yellow LED: Battery is charging with the power on.
- Solid Green/Blinking Yellow LED: Party Rocker Max is powered on and the battery is low.
- Solid Red LED: Battery is charging with the power off.
- LED OFF: Power is off, power cable is connected, and the battery is fully charged.
- Bluetooth LED/Disconnect Button: The LED will be lit when a device is paired to Party Rocker Max. This LED will not be lit when Party Rocker Max is first powered on (unless it was previously paired with a device). Press the button to disconnect a paired Bluetooth device.
- All Lights On/Off: Press this button to turn all lights on or off.
- Party Light Mode: There are four modes to select from for how the dome lights react to the music:
- Beat Sync: The dome lights spin and change color to the beat of the music playing.
- Auto: The dome lights spin and change color with a predetermined pattern regardless of the beat of the music playing.
- Single Color: The lights change one color at a time and do not move.
- Freeze: All colors remain on and unmoving until a new mode is selected.
- Off: The dome lights turn off.
- Speaker Light Mode: Press this button to cycle through these different light effects:
- EQ Bars (reactive to music)
- Vertical Lights Wipe (non-reactive to music)
- Diagonal Lights Wipe (non-reactive to music)
- Vertical Lights Scrolling (non-reactive to music)
- Snowflake/Square Lights (non-reactive to music)
- Moving Block Bar (reactive to music)
- Pulsating Block (reactive to music)
- Horizontal Pulsating Bar (reactive to music)
- Diagonal with Changing Colors (reactive to music)Cross with Changing Colors (reactive to music)
- Solid Color (reactive to music)
- Pulsating Block with Spinning Block (reactive to music)
- Snowflake/Square Lights Fill (non-reactive to music)
- Spinning Crosses and Expanding Square (non-reactive to music)
- Vertical Pulsating Bar (reactive to music)
- Moving Diagonal (non-reactive to music)
- Off (no lights)
- Light Buttons: Use these buttons to turn each color in the dome on or off–Red, Green, Blue, White, Pink, and Orange.
- Echo: Use this knob to add or remove an echo effect to the Microphone Inputs.
- Master Volume Control: This adjusts the speaker’s main mix volume, which includes Microphone Inputs, Auxiliary Input, and the audio of a paired Bluetooth device.
REAR PANEL
- Power On/Off Switch: Turns Party Rocker Max on or off.
- Power Cable Input (IEC): Insert the included power cable here to power the unit.
- Fuse: If the unit’s fuse is broken, lift this tab to replace the fuse. Replace it with a fuse with an appropriate rating. Using a fuse with an incorrect rating can damage the unit and/or fuse.
CONNECTING WITH A BLUETOOTH DEVICE
-
Turn on your Bluetooth device.
-
Power on Party Rocker Max and it will automatically go into pairing mode to search for Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is off.
-
If your Bluetooth device is not able to pair to Party Rocker Max, press the Bluetooth Disconnect button on the unit to break previous Bluetooth connections and reset the Bluetooth module.
-
Navigate to your Bluetooth device’s setup screen, find Party Rocker Max and connect.
NOTE: If your Bluetooth device prompts for a pairing code, enter 0000. -
Bluetooth LED will light up solid when it is “paired.”
NOTE: If you experience trouble pairing or playing music, update your device’s OS. -
To disconnect pairing, press the Bluetooth Disconnect button on Party Rocker Max.
-
To connect to another Bluetooth device, repeat steps 3-4.
NOTE: Maximum range will be achieved when using devices with Bluetooth 4.0.
TROUBLESHOOTING
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to reduce the overall volume of Party Rocker Max.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the microphone away from the speaker.
If you can’t hear the microphone over the music volume: Turn down the music volume from your source.
FAQs
Microphone quit working! Anyone else had this problem?****
ION Audio support here! I’m really sorry to hear about your experience with the included microphone.
Does the 40w have am/FM?****
ION Audio support here! Party Rocker Effects 40w does not feature an am/FM radio.
Is it loud enough for a Zumba class?****
ION Audio support here! Party Rocker Effects is not suitable for this purpose. We recommend using the Party Rocker Max which features 100-watt output power and is suitable for your requirements.
Are batteries included?****
ION Audio support here! The required x8 C-Batteries are not included. For further support on this subject, please feel free to contact us – amzsupport@ionaudio.com
How do I get a replacement cord for it mine broken?****
ION Audio support here! We’d love to assist you with obtaining a replacement power cord. Please feel free to contact us directly – amzsupport@ionaudio.com
Can the lights be turned off if wanted? And can the unit be plugged into an outlet or does it have to run on battery only?****
ION Audio support here! The lights can be deactivated by pressing the ‘Light’ button. Party Rocker Effects can be connected to a power outlet by using the supplied power adapter and is suitable for operation with both mains power and battery power.
Does the 40W have a chargeable battery?****
ION Audio support here! Party Rocker Effects 40w does not feature a rechargeable battery and is designed to utilize x8 C cell batteries (sold separately) or the included power adapter.
How should my party rocker plus be paired?****
The power button should be used to start Party Rocker Express. 2. Locate “Party Rocker Express” on the setup page of your Bluetooth device and connect. Note: Type “0000” if your Bluetooth device asks for a pairing code.
What is the best way to link my phone to my party rocker?****
If you hold down the Bluetooth button on the Party Rocker, you should hear a voice command that says “Bluetooth Pairing.” Make sure you pick the Party Rocker Go in the Bluetooth settings on your device after that. Once you hear the voice prompt “Bluetooth Paired,” you are ready to go.
Why doesn’t my ion speaker charge?****
It’s conceivable that the battery in your ION portable speaker needs to be changed if you’re noticing decreased battery life or trouble charging the battery.
How can an ION Bluetooth speaker be reset?****
Holding the Play/Pause buttons for two seconds can restart Bluetooth on smaller ION portable speakers like the Dunk or Helios. When a speaker loses connection with a device, a sound will be produced.
Can two different ION speakers be linked together?****
Before attempting to connect two speakers, be careful to disconnect any Bluetooth devices. To enter Stereo Link mode, hold down the Link button for a few seconds. The word “LINK” will appear in the display once a link has been formed. Next, carry out the same procedure on the second Pathfinder 320 speaker.
How long does it take Block Rocker Plus to charge?****
Mini Block Rocker can be connected to a computer or a power outlet using a USB power adapter using the provided micro-USB cable (sold separately). After three hours, the Mini Block Rocker will have finished charging.
Which app is required for an Ion Speaker?****
Use the ION Sound XPTM app with your iOS or Android phone to easily control music and lighting functions. The best part is that it has built-in handles and wheels for simple transporting as well as a built-in bottle opener for your convenience.
Ion speakers can be connected to TVs.****
I’ll be glad to assist! Yes, almost any Bluetooth source can be connected to the ION Total PA Glow Max. A stereo aux input on the speaker is also available, which is perfect for physically attaching a TV, tablet, computer, or other device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>