Maxell Bass 13 Black Bluetooth Wireless Earbuds-Complete Features/User Gide

Maxell Bass 13 Black Bluetooth Wireless Earbuds

Specifications

• BRAND : Maxell
• COLOR : Black
• CONNECTIVITY TECHNOLOGY : Bluetooth
• MODEL NAME : Bass 13 Bluetooth Earbuds Black
• FORM FACTOR : In-Ear
• PRODUCT DIMENSIONS : 4 x 4.75 x 7 inches
• ITEM WEIGHT : 1.44 ounces
• BATTERIES : 1 Lithium-Ion battery

Introduction

For the best audio experience, the heavy (bass) response has been increased, and the highs, mids, and vocals have been expertly tuned to be crystal clear. It has integrated microphone for calls. It also contains Comfortable soft silicone ear tips for prolonged listening. The driver has a copper coil added to it to improve the BASS response. It delivers vibrant powerful bass, a broad range of mids and vocals, and pristine highs.

HOW TO PAIR

From the power-OFF state, press and hold the Multi Button for around three seconds. The blue indicator starts to light up and flash slowly as soon as the power is turned on. Turn on Bluetooth on your gadget. The earbuds will automatically pair.

HOW TO CHARGE

Connect the main unit and the PC or USB adapter with the included charging USB cable using the USB terminal. Charging starts when the main unit’s indicator becomes red. The indication lamp turns off to indicate when charging is finished. (Approximate charging time: 3 hours)

HOW TO SETUP

• Open the settings first.
• Tap Connections after that.
• Next, tap Bluetooth.
• In the top-right corner of your screen, select Scan.
• Next, hold down the power button on your headphones for a few seconds.
• Find your headphones and tap them at the end.

HOW TO CONNECT

• Put your headphones in pairing mode as a first step. Put your earbuds in pairing mode as a first step.
• On your phone, go to Bluetooth Settings.
• Look for new Bluetooth-enabled devices to scan for.
• Choose your device and connect in step 4…
• Play your preferred music in step five.

HOW TO TURN ON

Toggle the listed headphones. Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name.

HOW TO FACTORY RESET

The standard process for resetting earbuds like these is to:

1. Put the earbuds in the charging case while leaving the lid open, and
2. Press and hold the charging case’s button for 10+ seconds. At that point, the charging case’s indicator light should change to show that the reset was successful.

Frequently Asked Questions

• Why won’t my earbuds charge?
  Ensure that they are placed correctly on the charging case or stand. Some headphones are charged through a stand or case that has a cord attached to it rather than directly through a cable. If you experience this, check that your headphones are set up correctly so that they can receive a proper charge.

• How are earphones charged while in a case?
  Close the charging case’s cover after putting the earbuds inside. The battery LED within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state. The earphones need about two hours to fully recharge.

• Why won’t my Bluetooth earbuds charge?
  Either the USB is not correctly inserted or the charging cable is faulty if your Bluetooth headphones are not charging. Verify that your USB is completely inserted in both the charging port and the headphone jack.

• On wireless earphones, where is the power button located?
  Put the earphones in the charging case and click the power button on the case’s front to start charging them.

• Why won’t my phone and Bluetooth headphones pair?
  If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

• How are Bluetooth earbuds charged?
  Close the charging case’s cover after putting the earbuds inside. The battery LED within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state. The earphones need about two hours to fully recharge.

• Why won’t my Bluetooth headphones pair with one another?
  If the battery in your headphones is low, they might not be able to pair. Additionally, I’ve discovered that certain Bluetooth headphones stay on when in the case, which causes them to deplete to zero percent more quickly than you would expect. Even if they claim to have some battery left, try plugging them in and giving them a thorough charge before pairing.

• Why won’t my left earbud work?
  When your left earphone quits working, you should examine the cable as soon as possible. You may check the tiny cable of your earphones by plugging them into your smartphone and repeatedly bending the cable with your fingers to look for any potential cable breaks.

• My earbuds won’t turn on; why?
  If the headphones’ power won’t turn on, the battery might not be installed properly or could need to be changed. To fix this problem, make sure you look through the following things. Important: Consult the product’s instructions if you require model-specific details to accomplish any of the tasks.

• Why just one of my earbuds is playing music?
  Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>