Maxell High Fidelity Dual Driver True Wireless Earbuds, Bluetooth-Complete Features/Instruction Manual
- June 5, 2024
- Maxell
Table of Contents
Maxell High Fidelity Dual Driver True Wireless Earbuds, Bluetooth
Specifications
- BRAND : Maxell
- EAR PLACEMENT : In-Ear
- COLOR : Black/Grey
- CONNECTIVITY TECHNOLOGY : Wireless
- MODEL NAME : 199652
- LISTENING TIME : 5 hours
- BATTERY LIFE: 20 hours
- BLUETOOTH VERSION: 5.0
- WATER RESISTANT: IPX3
Introduction
You have complete control. – Straight out of the case, automatic pairing and synchronization to each earpiece. Simplify your life by having a single button on each earbud for volume control, music playback, voice assistance, track skipping, and answering calls. The Dual Driver offers 5 hours of listening time in each earbud and an additional 5 hours when using the charging case. Now that’s a total battery life of 20 hours! Consequently, don’t be scared to lose yourself in your music for a moment.
The ergonomic rubberized design offers more stability and comfort, especially during prolonged use. Until you take them out, they won’t come out. In order to stop experiencing ear pain when listening to music. Until you remove them, they won’t start to fall out. So, you won’t have any ear pain when listening to music, continue reading. It has The Bluetooth 5.0 standard – The innovative technology enables increased range, reduced power usage, and faster transmission speeds. It has Water Resistant IPX3 – Prevents water and sweat spraying up to 60 degrees vertically. Components integrated: wireless charging case
HOW TO PAIR
From the power-OFF state, press and hold the Multi Button for around three seconds. The blue indicator starts to light up and flash slowly as soon as the power is turned on. Turn on Bluetooth on your gadget. The earbuds will automatically pair.
HOW TO WEAR
Put the earbud tips in your ear canal and twist the headphones into position to wear them. To do this, gently pull up on the top of your ears. Making ensuring the headphones are positioned correctly and firmly in the ear canal is made simple by doing this.
HOW TO CHARGE
Connect the main unit and the PC or USB adapter with the included charging USB cable using the USB terminal. Charging starts when the main unit’s indicator becomes red. The indication lamp turns off to indicate when charging is finished.
HOW TO SETUP
- Place your earbuds in the charging case and for 5 seconds, press and hold the case’s Pair button.
- When a notification for your Surface Earbuds arrives on your Android device, touch Connect. Then, tap Set up > Done.
Frequently Asked Questions
-
How can I connect my truly wireless earbuds?
To manually sync them, double-press the left and right earbuds at the same time. NOTE: Give it another shot if it doesn’t work the first time. The left earbud’s LED will flicker Red/Blue to indicate pairing mode when the earphones are synced. Put the earbuds back in the charging case. -
My wireless earphones won’t connect; why?
If the battery in your headphones is low, they might not be able to pair. Additionally, I’ve discovered that certain Bluetooth headphones stay on when in the case, which causes them to deplete to zero percent more quickly than you would expect. Even if they claim to have some battery left, try plugging them in and giving them a thorough charge before pairing. -
How can I tell when the battery in my true wireless earbuds is full?
The charging case’s front has an LED indicator that flashes red during charging and stays red when fully charged. NOTE: In order to prevent the problem of losing the earbuds’ “auto power on and off” features, it is crucial to keep the case charged at all times. -
Why won’t my earbuds charge?
Ensure that they are placed correctly on the charging case or stand. Some headphones are charged through a stand or case that has a cord attached to it rather than directly through a cable. If you experience this, check that your headphones are set up correctly so that they can receive a proper charge. -
When charging, how do wireless earbuds work?
Close the charging case’s cover after putting the earbuds inside. The battery LED within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state. The earphones need about two hours to fully recharge. -
Without a charger, how can I charge my earbuds?
Wireless earbuds can be charged using a power bank, laptops, or computers, or you can use a power bank. The laptop and earbuds can be connected via a USB wire. -
Why won’t my phone and Bluetooth headphones pair?
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues. -
How do Bluetooth earpieces function?
A Bluetooth® gadget connects to your mobile phone, smartphone, or computer using radio waves rather than wires or cables. Millions of the goods we use on a daily basis employ the Bluetooth wireless short-range communications technology standard, including headsets, smartphones, laptops, and portable speakers. -
Why do my wireless earphones only function on one side?
Your wireless earphones might only work on one side since the initial setup of the earbuds may not have gone smoothly. Other causes include a glitch (which necessitates a manual reset), the necessity to Bluetooth reconnect to your other device, and genuine hardware damage. -
Should I always have earbuds on hand?
When not in use, the case will charge both earbuds and keep them together. The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>