Maxell HP200M Headphone W/in-LINE MIC 6 Cord Swivel to Lay Flat User Manual
- June 4, 2024
- Maxell
Table of Contents
Maxell
Maxell HP200M Headphone W/in-LINE MIC 6 Cord Swivel to Lay Flat
Specifications
- BRAND: Maxell
- COLOR: Black
- CONNECTIVITY TECHNOLOGY: Wired
- MODEL NAME: 199929
- FORM FACTOR: Over Ear
- DRIVERS: 30 mm
- IMPEDANCE: 32 ohms
- FREQUENCY RESPONSE: 20 Hz to 22 kHz
- CORD LENGTH: 6 ft.
- CONNECTOR: 3.5 mm
Introduction
Looking for a pair of microphone-equipped, lightweight headphones? You require the Maxell HP-200M On-Ear Wired Headphones with Microphone. For a comfortable fit, it includes an adjustable headband, an inbuilt microphone, and soft foam padding. The headphones may be folded flat for storage because the earcups swivel. The 6 foot cord features a 3.5 mm connector at the other end.
HOW TO PAIR
- The Notifications shade should be lowered.
- The Bluetooth icon is in the top row of icons; press and hold it.
- Make sure the toggle switch is turned on at the top of the menu.
- Tap.
HOW TO WEAR
Put the earbud tips in your ear canal and twist the headphones into position to wear them. To do this, gently pull up on the top of your ears. Making ensuring the headphones are positioned correctly and firmly in the ear canal is made simple by doing this.
HOW TO RESET
- Remove the headset from the list of linked devices on your cell phone.
- Turn off your phone fully after deleting something, then turn it back on. This clears the Bluetooth stack in the phone’s Bluetooth software.
- Repair your phone and headphones.
HOW TO CONNECT TO PHONE
- Open the settings first.
- Tap Connections after that.
- Next, tap Bluetooth.
- In the top-right corner of your screen, select Scan.
- Next, hold down the power button on your headphones for a few seconds.
- Find your headphones and tap them at the end.
Frequently Asked Questions
Why won’t my phone and Bluetooth headphones pair?
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.
One earbud only can be paired?
Yes, you can take calls or listen to music in mono using just the right earbud. To adjust the volume and track, use a mobile device that is linked. Because it only connects to the right earbud and not the mobile device, you cannot use the left earbud by itself. Only the right earbud has a direct connection to the smartphone.
What is your TWS usage?
On your phone device, turn on Bluetooth pairing. To connect, tap “Air +.” When connected correctly, the right earphone will respond with the voice prompt “CONNECTED” and a blue light flash. The last paired cellphone will automatically be connected when the earbuds are powered on.
How are TWS earbuds reset?
Take out the earphones from the case, then turn them off by pressing the buttons for a short period of time. Hold down the buttons on both earbuds for around 5 seconds starting with the earbuds in the OFF position. Approximately 5 seconds after turning white, the LEDs will switch off. Your earbuds will reset as a result.
Should I always have earbuds on hand?
The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.
Without a charger, how do you charge wireless earbuds?
Wireless earbuds can be charged using a power bank, laptops, or computers, or you can use a power bank. The laptop and earbuds can be connected via the USB wire.
What situations wouldn’t you wear headphones in?
I don’t wear headphones when I’m operating a motorcycle, bicycle, or car. They can distract us and block out our auditory senses. Additionally, I avoid using them around my loved ones and friends. I believe it is impolite to use them when dealing with people, as I ought to be giving them my whole attention.
Why are the red flashes on my Bluetooth headphones?
Your headphones’ red or amber flashing usually indicates that the battery is getting low. A medium battery level shown by an orange light may indicate that you need to charge the headphones in the next few hours.
Why won’t my Bluetooth pair?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
My earbuds appear as two devices, why?
Disable Bluetooth and turn on Airplane Mode for 30 seconds if your Bluetooth headset appears twice on your computer. Remove your Bluetooth headset by going to Bluetooth settings. Run the Bluetooth troubleshooter in addition, and update your OS and drivers.