maxell 199342 Bluetooth Headset User Manual

June 5, 2024
Maxell

maxell logo

Bluetooth headset
199342

maxell 199342 Bluetooth Headset

User Manual

Package Contents

Bluetooth Stereo Headphone With Boom Mic
USB charging cable 6 Foot 3.5mm cord Instruction Manual

Key Features

  • Boom mic for taking/making calls
  • High-quality headband & ear-cups for comfort
  • Connect and stream wireless music anytime, anywhere
  • Supports Micro SD Cards
  • FM Radio Function
  • Built-in rechargeable battery
  • Ear cups padded with memory foam for extra comfort

Safety Instructions

Keep the unit away from heat sources, direct sunlight, humidity, water, and any other liquids. Do not operate the unit if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the unit.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
Do not use the unit with wet hands.
Do not put objects into any of the openings. Keep the unit free from dust, lint, etc.
Do not use this unit for anything other than its intended use.
Keep the unit out of reach of children.
This product is not a toy.
Do not use the handset at excessive volume levels, as damage to the hearing may occur.

Description of parts:

maxell 199342 Bluetooth Headset - fig

1. VOL+/NEXT SONG 5. AUX port 3.5mm
2. MFB button 6. Micro USB port
3. VOL-/PREVIOUS SONG 7. MIC 1
4. Indication Light 8. MIC 2

INSTRUCTIONS FOR USE

Charging Instructions
The Bluetooth headphone comes with a built-in rechargeable battery. Before using it for the first time we recommend that you charge the battery fully. It takes 1.5-2 hours to fully charge the battery. Only use the supplied USB Cord to charge the Bluetooth headphone.
Connect the USB charging cord to a computer USB port and the Micro USB plug to the charging port of the device. The Red LED light turns on while the device is charging. When the battery is fully charged, the LED light will power off.
Switching on/off the device
Press and hold the ON/OFF button to turn on/off the device.
Pairing the Headphone with Bluetooth devices (phone or music device)
Press and hold the ON/OFF button for 3-5 seconds to turn on the headphone, you will hear an indication tone and the LED flashes blue and red rapidly. Place the Bluetooth headphone and Bluetooth device (phone or music device) so that they are no further than 3 feet apart; activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the “Maxell-BT Boom 1” from the list of available Bluetooth devices. If required, enter the password ‘0000’ to confirm & finalize the pairing.
Once paired successfully, you will hear another indication tone, and the LED flashes blue slowly. You can now start to use the device.
If pairing is unsuccessful, turn off the device first and then re-pair following the above steps.
Once you have paired the Bluetooth headphone with a device, the headphone will remember this device and will pair automatically when the device’s Bluetooth is activated and is in range. You do not need to re-pair any previously connected devices.
The Bluetooth headphone will attempt to automatically connect to the last device it was paired with when switched on. If you want to pair it with a new device, please follow the steps outlined above.
Once the Bluetooth headphone is paired with your device, the music will transmit through the Bluetooth headphone. Please refer to your device’s user manual for further information.

Function Summary
Control Function

Function Summary Control Function

Function Operation Button
Increase Volume Playing music Press and hold the + button to increase the

volume
Decrease Volume| Playing music| Press and hold the – button to decrease the volume
Pause| Playing music| A short press on the MF button to pause the music
Play| Pausing| Short press the MF button to restart the music
Previous track| Playing music| A short press each time on the – button will return you to the previous track
Next track| Playing music| A short press each time on the + button will take you to the next track
FM| Playing music| Press the FMB button for 2 sec to switch the MI function
SD Micro Card| Playing music| Insert an SD Micro card with music format (MP3, RAC, APE), tt will search and play automatically

An indication tone will alert you when the vo ume is adjusted to a minimum or maximum level.
Making a call with the Bluetooth Headphone in Bluetooth mode Basic Operation

Function Operation Button
Answer a call Incoming Call Press the MF button once to answer an

incoming call
Reject a call| Incoming Call| Press and hold the MF button
End a call| Incoming Call| After your phone conversation, short press the MF button.
Increase Volume| During a call| Press and hold the + button will increase the volume
Decrease Volume| During a call| Press and hold the – button will decrease the volume
Redial last number| Standby mode and connected to a device| Short press the MF button twice

Listening to Music using AUX-In Mode

Insert the 3.5mm auxiliary cable (provided) to the aux input of the headphone. And, the other end of the cable connects to the audio device (such as a computer/tablet, etc.). Select your favorite song on the source device and play.
(Note: Using this aux-in mode, you do not need to turn on the headphone, and you need to control the volume increase/decrease, play/pause, and next/previous track through your source device only.)

LED indicator

Please refer to the below tables for a list of the LED statuses whilst using the Bluetooth headphone.

Charging Indication

LED Indication status of the Bluetooth headphone
Red LED Charging
LED Off Charging Completed

LED Indication

LED Indication status of the Bluetooth headphone
LED Clashes blue rapidly Pairing mode

Troubleshooting

No Sound| • Power on the headphones and charge the battery
• Increase the volume on your headphones, your mobile device, and your music source
• Move your mobile device closer to the headphones and away from Iron– any interference or obstructions
• Use a different music source
• Connect another mobile device
---|---
Poor Sound Quality| • Use a different music source
• Connect another mobile device
• Move your mobile device closer to the headphones and away from any interference or obstructions
Battery Won’t Charge| • Secure the ends of the USB charging cable
• Try another charging source

Care and Maintenance

Read the following recommendations before using the Bluetooth headphone. Following these steps, you will be able to enjoy the product for many years.

  • Do not expose the Bluetooth headphone to liquid, moisture, or humidity to avoid the product’s internal circuit being affected.
  • Don’t use abrasive cleaning solvents to clean the device.
  • Do not expose the device to extremely high or low temperatures as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
  • Don’t dispose of the device in a fire as it will result in an explosion.
  • Don’t expose the device to contact with sharp objects as this will cause scratches and damage.
  • Don’t let the device fall on the floor. The internal circuit might get damaged.
  • Don’t attempt to disassemble the device as it may get damaged if you are not professional.

Specifications

Bluetooth specification Bluetooth 5.0
Speaker 40 mm
Working time up to 12 hours (max. volume)
Impedance 32 ohms ± 15%
Maximum Input 60 mW
Frequency Response 160 Hz–200 Hz
Cord Length 6 ft. 3.5mm cord

(Note: Battery life & charging time may vary based on usage & types of devices used).

FCC INFORMATION:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2.  this device must accept any interference received, including interference that may cause undesired operation.
    The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WARRANTY INFORMATION:

Maxell warrants this product to be free from all defects for a period of 90 days from the date of original purchase. This Warranty does not apply to normal wear or damage due to accident, abnormal use, misuse, or neglect. This Warranty only applies to personal and individual use of the product and not for commercial, institutional, or any other use. Any defective item will be replaced, at no charge, upon reasonable confirmation by Maxell of its defective condition, if returned with proof of purchase to an authorized Maxell dealer or directly to Maxell Warranty Replacement, 3 Garret Mountain Plaza, Suite 300, Woodland Park, New Jersey 07424. Neither Maxell nor any authorized Maxell dealer shall be liable for consequential damages arising from this Warranty unless otherwise provided by law.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
    maxell logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals