Yusin YS-03 YSLCAM Smart Dental Camera User Manual

Yusin YS-03 YSLCAM Smart Dental Camera

Specifications:

• Product: WIFI Smart Dental Camera (YS-03)
• Model: 1YSLCAM
• Connection: WIFI
• Password: Default – 12345678

Product Usage Instructions

Power On and Connect:

1. Press and hold the power button for 3 seconds until the lens light flashes to indicate the device is turned on but not connected to the phone.
2. Connect to the device WIFI MDVO***** with the default password 12345678.
3. Once connected successfully, the lens light will remain on.

Real-time Video Display:
After successful connection, the real-time video will be displayed. You can record videos, take pictures, share content, check device power, and perform online password modifications.

Resetting Password:
If you forget your password and cannot connect, press the WIFI button four times rapidly when the device is turned on to reset it to the default password 12345678.

Power Off:
To turn off the device, press and hold the power button for 3 seconds.

Indicator Light Status:
White Light Flashing: Charging status/power-on disconnected status
White Light Always On: Fully charged/connected state

Button Functions:
WIFI Button: Press and hold in power-on state to control WIFI on/off.

Troubleshooting:

1. APP GPS: Ensure permissions for reminders and GPS positioning are turned on when downloading the APP.
2. WIFI Connection: Set up WIFI close to the phone with a strong signal.
3. No Internet Access: Device hotspot is for connecting and viewing pictures within 30 meters, not for internet access.
4. No-light Environment: Use device light source when recording video in low-light conditions for best results.
5. Low Power Reminder: Red indicator will flash for 10 seconds when power is low.

Frequently Asked Questions (FAQ)

1. Q: Can this device connect to multiple devices simultaneously?
   A: No, this product supports single-point one-to-one connection only.

2. Q: How often should I format the memory card?
   A: Format the memory card before first use and then weekly for optimal performance.

3. Q: What should I do if the connection fails?
   A: Repeat the above instructions for connection.

FCC Statement:
This device complies with part 15 of the FCC rules. Operation is subject to specific conditions to avoid harmful interference and ensure proper functioning.

Scan the QR code above to download and install “YSLCAM”

1. IOS  APP Store
   IOS system users directly jump to the APP Store to download and install

2. Android
   Android users can download through the options at home and abroad

• There are some mobile phones, when using “App Store”, it is recommended to use the general download mode when downloading, which is more convenient than the official download method
• When downloading the APP, the permissions for mobile phone reminders and GPS positioning need to be turned on, otherwise you will not be able to connect.

The steps of using the product are as follows

• Press and hold the power button for 3 seconds, The lens light flashes to indicate that the device is turned on,Not connected to the phone.

•  Connect the device WIFI “MDVO*****”, The default password “12345678”, After the connection is successful, the light of the lens is always on.

• After the connection is successful, the real-time video will be displayed. It can record video, take pictures, share, check the power of the device, Online password modification and other operations.

• If you forget your password and cannot connect, When the device is turned on, press the WIFI button four times in rapid succession. You can reset it to the default password
  “12345678”, which will take effect after restarting the device.

• Press and hold the power button for 3 seconds to turn off the device.

Indicator light status

• white light flashing
• Charging status/power-on disconnected status
• White light is always on
• Fully charged/connected state

Button Basic Function

Press and hold in the power-on state (to control WIFI on/off)

Troubleshooting

1. When downloading the APP, the permissions for reminders and GPS positioning need to be turned on.
2. When turning on the WIFI button, set it up close to the phone and within a range where the device’s WiFi signal is strong.
3. When the monitor is connected to the camera, it is normal for the device to be unable to access the Internet after connecting to the hotspot. The device hotspot is only to help connect. Connect and watch the pictures captured by the device from a limited distance (empty space within 30 meters).
4. When used in a no-light environment, when turning on the video recording function, it needs to be used with the device light source at the same time for the best effect.
5. In case of insufficient power, the red indicator of the light source button will flash for 10 seconds as a reminder. This product is mainly a single point one-to-one connection, and cannot connect multiple devices at the same time.
6. The memory card must be formatted before use for the first time. It is recommended to format it once a week to maintain optimal use
7. If the connection fails, please repeat the above instructions

FCC Statement

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>