levenhuk Wezzer Tick H50 Clock Thermometer User Manual

: June 3, 2024
: levenhuk

Table of Contents

levenhuk Wezzer Tick H50 Clock Thermometer
Parts overview
Getting started
Alarm setting
FM radio
Specifications
Care and maintenance
Battery safety instructions
Levenhuk International Lifetime Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk Wezzer Tick H50 Clock Thermometer

Parts overview

Time display
Sleep mode
FM radio
Indoor temperature
Indoor humidity
Alarm 1
Alarm 2
Time projector
AL button
VOL button
SET button
SNZ/LIGHT button
RADIO/SLEEP button
UP/PROJECT button
DOWN button
Battery compartment cover
Power cable socket
USB socket

Getting started

Connect the power cable to the device and the DC adapter (not included) via a USB plug and connect to the AC power supply; or
Open the battery compartment cover (16) and insert a battery according to the correct polarity. Close the cover.
NOTE! It is recommended to use an adapter for the continuous operation of the base station, although battery power is also possible.

Time setting
Press the SET button and hold it for 3 seconds. The digits that are to be set are flashing. Press UP/PROJECT or DOWN to change the
value, and then press SET to continue.
The setting order: 12/24h > Hours > Minutes.
Finally, press the SET button to save the settings and exit.

Alarm setting

Press the AL button to set the Alarm 1.
In the alarm setting mode press and hold the AL button for 3 seconds. The digits that are to be set are flashing. Press the UP/ PROJECT button or DOWN button to change the value, and then press the AL button to continue. The setting order: Hours > Minutes > Snooze time > Alarm sound. Press the AL button to confirm the settings and exit.
Repeat the instructions above to set the Alarm 2.
To activate or deactivate the Alarm 1 and/or Alarm 2, press the DOWN button in normal mode. The order: AL1 On > AL2 On > AL1 + AL2 On > AL1 + AL2 Off.
To silence the alarm, press any button (except the SNZ/LIGHT button). The alarm sound will automatically turn off after 2 minutes.

Snooze function
When the alarm sounds, press the SNZ/LIGHT button to activate the snooze function. The alarm will sound again in a preset time span.

Alarm sound
When setting the alarm, you can choose either buzzer (the display shows “bu”) or radio (the display shows “rd”) as the alarm sound.

Temperature setting
Press the DOWN button to switch between °C and °F.

Projection setting

Press the UP/PROJECT button to turn on the projection, and then press it again to choose the projection brightness (3 levels available).
Press and hold the UP/PROJECT button to change the projection degree (0° > 90° > 180°).

Backlight setting

Press the SNZ/LIGHT button to choose the brightness (4 levels available).
Press and hold the SNZ/LIGHT button for 3 seconds to turn on/off the Auto mode. The display will automatically lower its brightness level when it is dark.

Night mode

Press the SET button, and then press the UP/PROJECT button or DOWN button to turn on/off the Night mode. The display
brightness will be lowered during a scheduled time span.
Press the SET button to enter custom times for the Night mode. The setting order: Start hours > Start minutes > End hours > End minutes.
NOTE! Auto mode and Night mode cannot be selected simultaneously.

FM radio

Press the RADIO/SLEEP button to turn on the radio.
Press the SET button to automatically search for and save radio stations. When the search is complete, the screen will show “01” and the device will play the first radio station. Press the UP/PROJECT or DOWN buttons to play the other saved radio stations.
Press the VOL button, and then press the UP/PROJECT or DOWN buttons to change the volume from minimum (the screen will show “L00”) to maximum (the screen will show “L15”).
Press the SNZ/LIGHT button to turn the radio off.

Sleep mode

Press the RADIO/SLEEP button twice to activate the sleep mode. The radio will play for the selected time span and then will automatically turn itself off.
Press the RADIO/SLEEP button to select the desired time span (from 5 to 90 minutes).
Press the RADIO/SLEEP button twice in normal mode to check the remaining time before the radio stops playing.

Specifications

Air humidity, units of measurement % (RH)
Operating humidity range 20… 95%
Temperature, units of measurement °F, °C
Operating temperature range 0… +50°C (+14… 122°F)
Time format 24 hours, 12 hours
Radio frequency range 76… 108MHz
Snooze time 5… 60min.
Screen LED mirror display
Power supply 1pc CR2032 battery (210mA∙h), AC/DC adapter 5V 1000mA
USB cable 1.5m (4.9ft.), included

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center.
Protect the device from sudden impact and excessive mechanical force.
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire, and other sources of high temperatures.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
Only use accessories and spare parts for this device that comply with the technical specifications.
Check this device and its cables and connections for any possible damage before use.
Never attempt to operate a damaged device or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorized service agent.
If a part of the device or battery is swallowed, seek medical attention immediately.
Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk International Lifetime Warranty

All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met. For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612,
USA, +1-813-468-3001, contact_us@levenhuk.com
Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102,
Czech Republic, +420 737-004-919, sales-info@levenhuk.cz
Levenhuk®, Wezzer® are registered trademarks of Levenhuk, Inc.
© 2006–2022 Levenhuk, Inc. All rights reserved.
www.levenhuk.com