LECTROTAB XKA12X9 Trim Tab Actuators Instruction Manual
- June 4, 2024
- LECTROTAB
Table of Contents
XKA12X9 Trim Tab Actuators
Instruction Manual
Lectrotab trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low-profile transom mounting bracket. Actuators come in 12 and 24 VDC with 8 seconds of recommended stroke time or 4 seconds of stroke time.
FEATURES
- The upper ram seal location cannot be damaged due to fouled ram or barnacle growth
- Utilizes internal pressure equalization system
- Upgrades to the most popular hydraulic and electromechanical systems
- The internal brake system prevents unwanted tab movement when underway or backing down
- Quiet operation
- All actuators were fully load tested to push 1000 lbs of force
- The non-metallic external structure cannot corrode and will not deteriorate in the sun or underwater
TRIM TAB ACTUATOR MOUNTING DIMENSIONS
SPECIFICATIONS
Model| DC Voltage| Stroke Length| Stroke Speed|
Distance from Bolt to Pin| Vertical Height (Typical Installation
Fully Retracted)| Cable Length
(Feet/Meter)| Upper Mounting Bracket| Lower Mounting Bracket|
Use Actuator w/ Tabs
---|---|---|---|---|---|---|---|---|---
A| 12VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 11.875″/302mm| 6’/1.8m| None|
None| All Tabs
A-BK| 12VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 11.875″/302mm| 6’/1.8m|
Standard| Standard| All Tabs
A-BK-13| 12VDC| 2.25″/57mm| 8 sec.| 11.5″/292mm| 11.875″/302mm| 23’/7m|
Standard| Standard| All Tabs
A-BK-24| 12VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 11.875″/302mm| 28’/8.5m|
Standard| Standard| All Tabs
A-BK-25| 12VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 10.875″/276mm| 6’/1.8m| Low
Profile| Standard| All Tabs
A-BK-16| 12VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 10.875″/276mm| 23’/7m| Low
Profile| Standard| All Tabs
B| 24VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 11.875″/302mm| 6’/1.8m| None|
None| All Tabs
B-BK| 24VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 11.875″/302mm| 6’/1.8m|
Standard| Standard| All Tabs
B-BK-13| 24VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 11.875″/302mm| 23’/7m|
Standard| Standard| All Tabs
B-BK-24| 24VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 11.875″/302mm| 28’/8.5m|
Standard| Standard| All Tabs
B-BK-25| 24VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 10.875″/276mm| 6’/1.8m| Low
Profile| Standard| All Tabs
B-BK-16| 24VDC| 2.25″/ 57mm| 8 sec.| 11.5″/292mm| 10.875″/276mm| 23’/7m| Low
Profile| Standard| All Tabs
Actuators are also available with a 4-second stroke time. 4-second stroke time
model numbers begin with the letter “C” for 12vdc and “D” for 24vdc.
Please note that Lectrotab recommends using the 8-second stroke time for a
smoother, more controlled boat response to tab adjustments.
Linear Devices Corporation
11126 Air Park Road, Suite G, Ashland, VA 23005
www.lectrotab.com,
Ph 804-368-8428,
Fax 804-368-8438
May 2022
Documents / Resources
|
LECTROTAB XKA12X9 Trim Tab
Actuators
[pdf] Instruction Manual
XKA12X9 Trim Tab Actuators, XKA12X9, Trim Tab Actuators, Tab Actuators,
Actuators
---|---