AZZA Inferno 310 Mid Tower Case Installation Guide
- June 6, 2024
- AZZA
Table of Contents
Inferno 310
USER MANUAL
www.azzatek.com
Installation Instructions
Specifications
Model|
---|---
Model Name:| INFERNO
Model Number:| CSAZ-310
Specs|
Type:| ATX Mid-Tower
Color:| Black (exterior)/Black (interior)
Side Panel Window:| Tempered Glass with Rubber Mounts
Max CPU Cooler Height| Up to 155mm
With Power Supply:| No
Motherboard Compatibility:| ATX, Micro ATX
Expansion|
External 5.25″ Drive Bays:| 1
Internal 2.5″ Drive Bays:| 6
Internal 3.5″ Drive Bays:| 2
Expansion slots:| 7
Front Ports|
| 2xUSB 3.0, HD Audio
Cooling System|
120mm Fan:| Front 2x120mm HURRICANE RGB LITE fan, 1x120mm black rear fan
Physical Specs|
Dimensions(HxWxD)| 480X205X475mm / 18.9X8.1X18.7 inch
Weight| N.W.: 6.7 kg / G.W.: 8.3 kg
Features|
RGB Light Effects| 2xHURRICANE RGB LITE fans, RGB logo plate, RGB front panel.
All RGB light effects controlled by external button.
Max VGA card length| Support up to 380mm long VGA card
Tempered Glass Side Window| High-quality tempered glass with rubber mounted
side window allows for clear visuals to inner components.
Available Fan Ports| 3x120mm/2x140mm fan ports on the top 2x120mm/2x140mm fan
ports in the front (2x120mm RGB LED fans included) 1x120mm/1x140mm fan port in
the rear (120mm fan included)
Water Cooling| Supports radiator up to 360mm on top/280mm in front
Isolated Chamber
| Power supply is housed inside its own isolated chamber, preventing its heat
from affecting other components.
Easy installation Cooler| A pre-cut hole for easy installation of CPU cooler,
eliminating the need to remove the motherboard
Chassis Parts
| 1 | Dust filter |
|---|---|
| 2 | Right side panel |
| 3 | Door |
| 4 | SSD brackets |
| 5 | HDD/SSD tray |
| 6 | Front bezel |
| 7 | RGB fan x2 |
| 8 | Logo plate with back RGB lights |
| 9 | Hand screw |
| 10 | Left side panel |
| 11 | 120mm black fan x1 |
| 12 | ODD bay |
Control Panel Functions
3.5”/2.5” HDD Installation
Two mounting holes support 2.5″ devices. (A B)
Two brackets support 2.5” devices. (c D)
Two multifunctional trays support 3.5″ HDD or 2.5″ SSD. (E F)
Cooling System Installation
HURRICANE RGB LITE fan
Patented Design
VORTEX AIR (Patented)
To help improve cooling performance, our patented Shark Teeth design helps
channel the air into a concentrated stream for more powerful air flow.
SILENCE (Patented)
Special grooves carved into the fan blades help reduce noise levels up to ten
percent!
SYNC RGB (Patented)
By plugging the Hurricane RGB fan into a RGB-compatible motherboard, lighting
and fan speed can be controlled directly without the need for additional
hardware.
CVLINDIVICAL LIGI6TNING (Patented)
More light is better. With a frame made of acrylic material, the RGB lighting
is spread all throughout the fan’s frame, giving a clean, uniform look.
| Model Name | HURRICANE RGB LITE |
|---|---|
| Model Number | FNAZ-12RGB-B-002 |
FN»-12RGB-W-002
Rated Voltage| 12V
Fan Speed| 1500 RPM
Max. Air Pressure| 1.26 mm-H2O
Max. Air Flow| 47RPM
Max. Noise Level| 28.7dB(A)
Bearing Type| Sleeve Bearing
Life expectation| 60,000 hrs,40”/
Connector| 3-PIN
4-PIN RGB: Male & Female
Fan Dimension| 120x120x25mm
CO OF| 7 Color with RF remote 16.8M with LUMI
HURRICANE RGB LITE fan
The first RGB fan is to be connected to the RGB LED control board in the chassis, while the rest of them can be daisy chained to the first one with their own male and female plugs.
Two versions RGB control board,pIease follow the below instructions depends on your chassis.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>