BRANDMOTION FLTW-7692V3 LCD Display Mirror User Manual
- June 5, 2024
- BRANDMOTION
Table of Contents
BRANDMOTION FLTW-7692V3 LCD Display Mirror
CONTENTS
The package contains the following:
- Rearview mirror monitor
- User manual
- Wire cover
- Wire control
- Wire harness
FEATURES
- 7.2-inch wide LCD display screen
- 3 analog video inputs
- Adjustable Backup guidelines
- Touch screen button
- Back-up camera display
- Automatic brightness adjustment
- Channel switch among VIDEO, RIGHT, LEFT, CAMERA RIGHT, LEFT, and CAMERA
- Trigger wires for reverse/ left/ right
SPECIFICATIONS
- Screen size: 7.2 inch
- Aspect resolution: 1280(H)*390(V)
- Working temperature: -200C~+650C
- Display screen: TFT-LCD
- Working voltage: DC 10V-DC 16V
- Signal system: PAL/Auto/NTSC
HOW TO INSTALL MIRROR MONITOR
Remove the original mirror
Different cars have different brackets. It depends on your vehicle maker and manufacturer. There are many methods to remove the original rear view mirror, however, please don’t force the mirror off the bracket The manufacturer will not be responsible for damage caused to your car by the wrong installation of the mirror.
Install mirror monitor on the plate
NOTE: Always use caution, DO NOT force the mount. We will not be responsible for broken windshields. If you are not sure how to remove or re- install the mirror seek trained, qualified help.
CAUTION!
HOW TO WIRE
How to install the wire harness, wire cover, cable cover, and connector cable on the mirror?
NOTE: The picture may not be in line with this type of mirror, just to demonstrate the installation method.
BUTTONS OPERATION
BACK-UP CAMERA DISPLAY
When the car is in reverse, the monitor will automatically display a backup camera.
AUTOMATIC BRIGHTNESS ADJUSTMENT
The brightness of the screen varies with ambient light, thereby, making the driver get a clear and comfortable image when reversing.
WEAK LIGHT: When ambient light is weak, the screen will automatically reduce the brightness and get better vision.
STRONG LIGHT: When ambient light is strong, the screen will automatically increase the brightness and get better vision.
FAQ
Q: Rear-view mirror is not powered.
A: Make sure that ACC, B+, and GND are well connected, and that the
filter box’s fuse is not burnt out.
Q: The video displayed on the screen is overlapped by the rolling shadow of
another video.
Make sure that the video extension interface is in good condition. If this
still exists, it is recommended to use a video extension cable with a
shielding layer, as shown in the following picture.
No entertainment video is permitted when driving except the demo for navigation and backup camera display!