HALO 801107367 RapidPack 10K Wireless Charging Dock with Power Bank Instruction Manual

June 3, 2024
HALO

halo-logo

HALO 801107367 RapidPack 10K Wireless Charging Dock with Power Bank

HALO-801107367-RapidPack-10K-Wireless-Charging-Dock-with-Power-Bank-
product

THANK YOU
We appreciate yaur business and would like ta thank yau far chaasing HALO! Yaur safety is important ta us. Please read the instructions carefully and utilize the proper precautions before operating this equipment.

INCLUDED ITEMS

  • HALO RAPIDPACK lK WIRELESS
  • 20W USS Charging Adapter
  • USS C-to-C CableHALO-801107367-RapidPack-10K-Wireless-Charging-Dock-with-Power-Bank-fig-1
  1. Power ON/OFF Button
  2. Wireless Charging Pad
  3. Flip Out Phone Holder
  4. USS A Output Port
  5. Battery Indicators
  6. PD/OC and Wireless Indicator 7 I USS C Bi-direction Port
  7. Integrated Kickstand
  8. USB C-to-C Cable
  9. 20W USS Charging Adapter

OPERATING INSTRUCTIONS

CHARGING YOUR HALD RAPIDPACK 1DK WIRELESS

IMPORTANT: Before using your HALD RAPIDPACK l □K WIRELESS for the first time, fully charge it. HALD RAPID PACK l □K WIRELESS can be charged using the USB-C bidirectional port. The USB-C port allows faster charging. The total charge time is 3-4 hours.HALO-801107367-RapidPack-10K-Wireless-Charging-
Dock-with-Power-Bank-fig-2

NOTE:

  • While charging, the Power Level Indicator lights will indicate the charge percentage.
  • When fully charged, disconnect the charging cable.

POWER LEVEL INDICATORS

HALO-801107367-RapidPack-10K-Wireless-Charging-Dock-with-Power-Bank-
fig-3

  • linking light indicates recharging. Solid lights indicate fully charged.

POWER DELIVERY/OUICK CHARGE AND WIRELESS INDICATOR DISPLAY

HALO-801107367-RapidPack-10K-Wireless-Charging-Dock-with-Power-Bank-
fig-4

  • Displays GREEN when Power Delivery/Quick Charge is active.
  • Displays BLUE when Wireless output is active.

CHARGING YOUR PERSONAL ELECTRONIC DEVICE

Use the appropriate charging cable that came with the HALD RAPID PACK l □K WIRELESS to charge your electronic device. You can charge up to three devices simultaneously. Once your electronic device is connected, it will begin charging automatically.

NOTE:

  • You may also use the USB cable that was supplied with your electronic device.
  • The HALD RAPIDPACK l □K WIRELESS may be charged and discharged simultaneously.HALO-801107367-RapidPack-10K-Wireless-Charging-Dock-with-Power-Bank-fig-5

WIRELESS CHARGING A COMPATIBLE SMARTPHDNE

  1. Place your wireless-compatible device on top of the wireless charging pad on top of your HALD RAPIDPACK K WIRELESS and press the USS/Wireless ON/OFF Button. Charging will begin.
  2. Check your smartphone to confirm it is charging. If it is not charging, adjust the position of the phone on top of the wireless charging pad.

NOTE:

  • Ensure there is no metal obstruction on the back of the phone or phone case, or credit cards inside the phone case while wirelessly charging. LED will rapidily blink blue if an obstruction is detected.
  • Wireless charging offers the convenience of cable-free charging. However, in some cases, charging speed may be faster using “wired” charging. This may vary based on the type of mobile device.
  • The wireless transmission of energy during the inductive charging process will naturally generate more heat compared to “wired” charging.

WIRELESS CHARGING TROUBLESHOOTING TIPS

HALO-801107367-RapidPack-10K-Wireless-Charging-Dock-with-Power-Bank-
fig-7

WATCH WHILE CHARGING

Your HALD RAPIOPACK l0K WIRELESS is equipped with an integrated kickstand and fold-out phone holder so that you can easily watch your favorite movie or TV series while charging your phone. Works with most small to mid-size smartphones.HALO-801107367-RapidPack-10K-Wireless-Charging-Dock-with-Power-
Bank-fig-6

SPECIFICATIONS

  • Battery Capacity ……………………………….. 10,000mAh / 37Wh 3.7V
  • USB-C lnput … ………………………………………… 5V 3A, 9V 2A, 12V 1.5A
  • USB-C Output … ……………………………… 5V 3A, 9V 2.22A, 12V 1.67A
  • USB-A Output … ……. ..4.5V 5A, 5V 3A, 5V 4.5A, 9V 2A, 12V 1.5A
  • Wireless Output. …………………………………………………………… Max 15W
  • Max Output.. ………………………………………………………………………. 22.SW
  • Total Output(USB-C + USB-A ) ………………………………………….. 5V 3A
  • Dimensions………………………………………………. 5.7 x 2.B x O.B inches
  • Weight… ……………………………………………………………………………… 0.5 lbs
  • Operating Temperature ………………………… 32’F – 113’F (0 – 45’C)

LIMITED WARRANTY

At HALO, we are dedicated to making the best quality products. To back this up, this product is warranted. HALO warrants its products to be free from defects in material and workmanship under normal use. During the first 90 days from date of purchase, HALO will repair or replace the defective product. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase. For all questions about the warranty or exchange requests, please call BBB-907-6274 or visit our website at www.HALOPOWER.com. All copyrighted and copyrightable materials, including, without limitation, the logo, design, text. graphics, pictures, copy writing and the selection and arrangement [“Materials”) thereof are ALL RIGHTS RESERVED Copyright© 2022 Alliance Sports Group, LP. Alliance Consumer Group 700 Henrietta Creek Road Roanoke, Texas 76262

SAFETY PRECAUTIONS/ lD MOVING AND STORAGE INSTRUCTIONS

CAUTION – Read all safety infarmation befare using this praduct. Failure to follow these instructions may result in electrical shack, explasian, fire which may result in seriaus injuries, death ar praperty damage.

  • Read all instructions before using the product.
  • Misusing or incorrectly connecting your HALD RAPID PACK l □ K WIRELESS may cause electric shock to users and damage equipment.
  • Do not operate in explosive atmospheres such as in the presence of flammable liquids, gases or dust.
  • Keep dry and away from moisture and corrosive materials. This product should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
  • Do not expose to moisture, water, rain, or snow.
  • Keep away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that product heat.
  • The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not expose to fire or excessive temperature. Do not expose to heat above 17B”F [BD”CJ or incinerate.
  • In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
  • HALD RAPIDPACK l □ K WIRELESS may become warm under extended high power operation. Do not cover, wrap, or otherwise restrict during operation.
  • Do not disassemble the HALD RAPID PACK l □K WIRELESS. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
  • Do not drop or subject to strong impacts. Do not operate if the unit has received a sharp blow, or has otherwise been damaged in any way.
  • Do not puncture, crush or subject to mechanical shock.
  • This product and its accessories are not toys and should be kept away from children.
  • Do not insert any foreign object into the ports or openings.
  • Do not clean with harsh chemicals, soaps or detergents. Just wipe the unit with a soft cloth.
  • Make sure the charging ports do not become contaminated with lint or other debris. Use a canned-air type of product periodically to ensure that the port openings are clear.
  • Batteries should be recycled or disposed of as per state and local guidelines.

COMPLIANCE WITH FCC REGULATION

This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer­ence received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced technician for help.
  • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION:
To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.

MODIFICATION
Any changes or modifications of this device could void the warranty.

FCC Warning Statement

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals