onn Y2641 Rechargeable Wireless Keyboard User Manual

onn Y2641 Rechargeable Wireless Keyboard

Important Safety Instructions

• Inspect the keyboard and charging cable before use. If any parts are damaged, contact Technical Support before resuming

• Do not open, disassemble, modify, drop, crush, puncture, incinerator shred the Bluetooth®

• The keyboard is not serviceable. Do not attempt to open, repair, or

• To prevent a short circuit or other potential hazards, do not insert foreign metal objects into the keyboard or its

• Keep the keyboard away from moisture and do not use it with wet hands. Moisture in or on the keyboard may lead to electrical shock. If exposed to moisture during use, turn off and unplug the charging cable immediately. Contact Technical Support before resuming

• The keyboard contains a lithium-ion battery. Keep away from heat sources and open

• It is normal for the keyboard to become warm during To prevent overheating, keep the area around the keyboard ventilated. Do not place anything on or around the keyboard during operation.

• Do not operate the keyboard near a heat source or in direct Recommended for use in temperatures between-5°C and 50°C. NEVER use in temperatures outside the range of -5°C to 50°C.

• If the keyboard begins to emit a strong odor, becomes hot to the touch, swells or expands, turn it off and unplug the keyboard immediately and contact Technical

• If the battery inside the keyboard leaks for any reason, turn off and unplug the keyboard

• Do not allow the contents of the battery to contact your skin or  In the event of contact, wash the affected area with large amounts of water and seek medical attention immediately.

CARE AND STORAGE

• Do not store your keyboard in areas of high temperatures (such as in your car) or in high humidity.

• Do not place heavy objects on top of the keyboard.

• Keep the keyboard away from oil, chemicals, and liquids.

• Clean the keyboard with a damp clean cloth.

DISPOSAL
• Do not burn or dispose of your keyboard in a fire or incinerator.

• Do not throw your keyboard away in the trash. The keyboard contains a lithium ion battery. Contact your local electronics recycler to recycle the keyboard.

What’s in the Box
• Rechargeable Wireless Keyboard

• Micro USB Cable

At a Glance

1. Bluetooth Status Indicator
2. Connect Button
3. On/Off Slider
4. Charging Indicator
5. Power Indicator
6. USB power charging port

Keys and Functions

LED Indicator Guide

LED Indicator Guide

Indicator| LED Status| Description

Power Indicator

| Solid blue (off after

3s)

| Powered on
Flashing blue

(every 2s)

| Low power

Bluetooth Indicator

| Flashes blue| Ready for pairing
Off| Paired successfully
Caps Lock Indicator| Solid blue| Caps function enabled
Charging Indicator| Solid red| Charging
Solid green| Fully charged

Powering On Your Keyboard

Slide the On/Off slider to power on the keyboard. The power indicator will turn solid blue.
Note : The keyboard will enter sleep mode after being idle for 30 minutes. Press any key to activate it.

Pairing Your Wireless Keyboard with Your Devices

1.  Slide the On/Off button to turn on the keyboard. The power indicator will turn solid blue for 3 seconds and turn off to save power.

2.  Press the Connect button on the keyboard. The Bluetooth indicator will flash blue.

3.  Enable your device’s Bluetooth function on your iOS/Android/Windows device.
   A list of Bluetooth devices available will be displayed.

4. Select “Rechargeable Wireless Keyboard”.
   The keyboard will be paired with your device successfully.

Pairing Your Wireless Keyboard with Your Devices

Plug one end of the provided cable into the keyboard and the other into a power adapter (not provided).

Note : The cable is used for charging your keyboard only.

Specifications

Specifications

Operating Voltage| 3.0V – 4.2V
Operating Current| < 2 mA
Standby Current| 45 uA
Operating Range| < 7.3 m
Lithium Battery Capacity| 280 mA
Sleep Time| < 30 min
Wakeup Time| 3 sec
Charging Voltage / Current (Max)| 5V / 200 mA
Operating Temperature| -5℃ to 50℃
Bluetooth Version| BT 5.1 (BDR)
Standby Time| 90 days
Working Time| 90 hours

Notice

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio / TV technician for

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license.

Need help?
We’re here for you every day from 7 a.m. – 9 p.m. CST. Give us a call at 1-888-516-2630
We’d love to hear from you.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>