OVO-J1 Wireless Microphone User Manual
- June 6, 2024
- OVO
Table of Contents
OVO-J1 Wireless Microphone User Manual
Package Contents
-
Wireless Microphone
-
User manual
-
Foam Mic Cover
-
Anti-rolling Ring
-
Receiver
-
3.5mm Audio Cable
-
USB Extension Cable
Product Review
-
-
Battery Level
-
Signal
-
Channel
-
Initial Setup
Read all instructions before you use this device and follow all instructions. if physical injury, loss of data or damage is caused by failure to follow instructions, the warranty does not apply.
-
Connecting
-
Microphone
-
Pairing
-
Press and hold for 2 seconds
-
Pairing
-
Pairing is completed
-
Enjoy singing
Using the Microphone
-
Power on/off
-
Adjust Echo
FAQ
-
The power indicator is not on
- Press and hold the power button for 2 seconds to check whether the power button is operating correctly.
- To check the batteries are charged and inserted correctly. If no, please install two AA batteries.
-
The microphone is without sound.
- Please check the receiver is correctly plugged into the USB port and the indicator light is on. If not, please plug into another USB port.
- Please check the audio cable is properly connected.
- Check the speakers are turned on and switched to the correct mode. Check the volume of voice sources and speakers are adjusted properly.
-
The microphone disconnect randomly.
-
Check the battery level. When the display shows low battery level possible.
please replace the batteries as soon as -
Press and hold the power button to pairing again.
-
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful Interference in a residential Installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment or and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The antenna(*) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
The device was tested and complies to measurement standards and procedures specified in FCC CFR Tile 47 Part 15 Subpart C.
Warning
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Specification
- Model: OVO-.11
- Frequency: UHF 657- 663 MHz
- Distortion ratio: <1% (1KHz)
- Sensitivity: -52 ± 3dBV/Pa (1KHz)
- Frequency Response: 75Hz-18KHz(±3dB)
- Operating Distance: <10m
- Dimensions: Microphone 245x55mm Receiver 108x28mm 2.4G Frequency response: 2450MHz Modulation Technology: GFSK channelsy1
Warranty
12-Month Warranty for Quality-Related Issues
OVO warrants its products to be free from defects in materi-al and workmanship, under normal use, for 12 months from the date of purchase. If a product proves to be defective in material or workmanship during the warranty period, OVO will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. This warranty is valid only for the first consumer purchaser. For information about receiving service under warranty, please refer to the Customer Service page. You will need to provide your product’s serial number.
What the warranty does not cover:
- Any product on which the serial number has been defaced,modified, or removed.
- Damage, deterioration, or malfunction resulting from:
- Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
- Operation outside of product specifications. Operation of the product for other than the normal intended use or not under normal conditions.
- Repair or attempted repair by anyone not authorized by OVO.
- Any damage of the product due to shipment. Removal or installation of the product. Causes external to the product, such as electric power fluctuations or failure.
- Use of supplies or parts not meeting OVO’s specifications.
- Normal wear and tear.
- Any other cause which does not relate to a product defect.
- Removal, installation, and set-up service charges.
Information in this document may change without notice.
Warning
changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Compliance Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>