Bright 021295 Thermometer Instruction Manual
- June 3, 2024
- Bright
Table of Contents
Bright 021295 Thermometer
Jula reserves the right to make changes.
For latest version of operating instructions, see
www.jula.com
EU DECLARATION OF CONFORMITY
SAFETY INSTRUCTIONS
SYMBOLS
TECHNICAL DATA
- Transmitter frequency (wireless communication) 433.92 MHz
- Transmission rang e ≤60 m
- Battery sold separately) 2x LR03 AAA
- Measuring range (indoors) 0°C (32°F) – 50°C (122 °F)
- Measuring range (outdoors) -39.9 °C (-39.8 °F) – 59.9 °C (139.8 °F)
- Size (indoor unit) 60×22.5×90 mm
- Size (outdoor sensor) 92x40x23 mm
DESCRIPTION
DISPLAY
- Indoor temperature
- Outdoor temperature
- Highest/Lowest outdoor temperature
- Signal indicator
- Clock
- Time format
FUNCTION BUTTONS
- IN/OUT button
- MEM/+ button
- SET/°C/°F button
USE
BEFORE USING FOR THE FIRST TIME
- Open the battery compartment on the back of the receiver and insert the batteries with the correct polarity. Replace the battery compartment cover.
- Open the battery compartment on the back of the transmitter and insert the batteries with the correct polarity. Replace the battery compartment cover.
- When the batteries are inserted all the symbols on the display will go on for 3 seconds.
- The receiver searches for a connection to the transmitter. This takes about 3 minutes and a flashing icon for the RF antenna is shown in the receiver display outdoor field.
MANUAL SETTING OF CLOCK
- Press the button (3) for about 3 seconds to confirm. The display field for 12/24 hour display flashes. Press the button (2) to set 12/24 display.
- Press the button (3) again to confirm. The display field for hours flashes. Press the button (2) to set the right hour.
- Press the button (3) again to confirm. The display field for minutes flashes. Press the button (2) to set the right minutes.
- Press the button (3) again to confirm and finish, and to switch to clock mode.
- After 30 seconds without pressing a button the clock switches automatically from setting mode to normal mode.
TEMPERATURE DISPLAY IN °C/°F
Select the temperature display in °C or °F by tapping the button (3).
DISPLAY OF HIGHEST AND LOWEST MEASURED TEMPERATURE
- Switch between display of current temperature and highest/lowest since last reset for indoor and outdoor temperature by pressing the button (2).
- Press once to show the highest measured indoor and outdoor temperature.
- Press twice to show the lowest measured indoor and outdoor temperature.
- Press three times to go back and show the actual temperatures.
Press the button (3) for about 3 seconds to reset the highest and lowest temperature.
SWITCHING BETWEEN DISPLAYING THE INDOOR AND OUTDOOR TEMPERATURE
Tap the button (1) to switch between showing the indoor and outdoor
temperature on the display.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>