Wohler AMP1-16-M Dual Input SD SDI 16 Channel Audio Monitor Owner’s Manual

June 3, 2024
WOHLER

Wohler AMP1-16-M Dual Input SD SDI 16 Channel Audio Monitor

Wohler AMP1-16-M-Dual-Input SD SDI-16-Channel-Audio-Monitor-FIG-
\(4\)

Compact, low-cost unit to select and monitor up to 16 audio channels from either of two 3G/HD/SDSDI inputs
The AMP1-16-M offers fast, intuitive operation for monitoring SDI audio in the most demanding production applications. Whether in the studio or on the road, the AMP1-16-M p provides instantaneous selection and summing of any grouping of SDI audio pairs. It features adjustable volume and balance controls, a clear display of levels, and phase indications on bright 2.4” LEDbacklit LCD displays with configurations that can be created, saved and recalled via Ethernet or USB flash drive using an intuitive PC interface.

PC Control and Configuration

Intuitive PC software makes it easy to configure, store and load presets

Features

  • Simultaneous level metering of 16 de-embedded audio channels from SDI
  • High resolution metering with 166-segment displays
  • Quick, intuitive push-button selection of any pairs to sum to monitor
  • Monitor through built-in speakers, headphones or analog outputs with optional muting for internal speakers
  • Stereo or mono monitoring
  • Stereo phase indicators
  • Adjustable Volume and Balance
  • Adjustable Channel Trim
  • Easy update and management software for PCs
  • Balanced stereo analog outputs on XLR-Ms. Fixed level or volume/balance controlled.
  • Automatic frame rate detection and selection
  • Totally digital system architecture with high fidelity Class D amp
  • Selectable line level or front panel volume control and outputs
  • Shallow chassis depth for easy installation in OB vehicles and consoles

Order Part Number

AMP1-16-M: 8130-0400

Rear Panel

Wohler AMP1-16-M-Dual-Input SD SDI-16-Channel-Audio-Monitor-
FIG- \(2\)

Block Diagram

Wohler AMP1-16-M-Dual-Input SD SDI-16-Channel-Audio-
Monitor-FIG- \(3\)

Specifications

Inputs Two 3G/HD/SD-SDI Inputs on BNC
Outputs Two loop-through SDI Outputs on BNC Selected SDI Re-clocked Output on

BNC Balanced stereo analog out on XLR-M
Interfaces| External PC control via Ethernet port

Front panel USB port for preset storage/transfer

Front Panel Displays| Two 2.4” LED-backlit LCDs
Level Metering| Simultaneous average and PPM
Acoustic Frequency Response| 150 +] WR 16 N+] [+- 5 G%] DFRXVWLF ǩ 40 +] WR 20 N+] [+- 1G%] HOHFWULFDO
Peak Acoustic Output| 90 dB SPL at 2 feet
Power Output| 6 W RMS per side, 12 W peak
Hum and Noise| Better than -68 dB below full output
Power| IEC connector

100 to 240 VAC ± 10%, 50/60Hz 60 W; self-contained power supply

Dimensions (W x H x D)| 4.25” x 19” x 1.75” (108 mm x 483 mm x 44 mm)
Shipping Weight/Net Weight| 7 lbs (3.2 kg) / 5 lbs (2.3 kg)

Specifications subject to change, errors and omissions excepted.
All trademarks, product names and logos are the property of their respective owners. Any rights not expressly granted herein are reserved. ©2018, Wohler Technologies Inc.
Rev: 06/14/2022
Wohler Technologies Inc., 1280 San Luis Obispo Ave. Hayward, California 94544, USA +1 510 870 0810
sales@wohler.com
www.wohler.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals