ITALFILE IRIS TOP Remote Control User Manual
- June 2, 2024
- ITALFILE
Table of Contents
ITALFILE IRIS TOP Remote Control
IRIS model TOP is a self-learning remote control that can duplicate most of the fixed and rolling code remote controls with different frequencies for each button, excluding those from 20 to 40 MHz. Just like all ITALFILE products, even IRIS is designed and fully produced in ITALY.
STANDARD DUPLICATION PROCEDURE
For more specific procedures go to www.italfile.it. Keep away from sources of radio interference such as mobile phones, wirelesses, etc. when carrying out the procedure.
- Press together the 2 buttons on the IRIS remote control, and release them when the red LED starts flashing.
- While it is flashing, press the IRIS button to be saved and release it when the red LED starts flashing more rapidly.
- While the LED is flashing, place the 2 remote controls as shown in the figure and keep the button of the original remote to be duplicated pressed, without releasing it.
- If the IRIS LED is steady and green, this means that the original remote is fixed code, so it will already be operational.
- If it is RED, the original remote is rolling code, so, according to the copied model, it will become operational after having SAVED TO THE AUTOMATIC RECEIVER BY RADIO, or by acting manually on the system receiver.
SAVING TO THE AUTOMATIC RECEIVER BY RADIO
Stay close to the system when saving.
- Press the programmed button of IRIS, releasing it when the red LED switches off and the green one starts flashing.
- Wait for the LED to stop flashing, then press the button again to verify the correct operation.
HIDDEN KEY/SOURCE FUNCTION
- Press together the 2 buttons and release them when the red LED starts flashing.
- Press again the 2 buttons together and release them when the LED flashes twice with a pause in a repeated process.
- While flashing, press the programmed button; IRIS will transmit the source code while the button is kept pressed.
AUTOMATIC STORAGE EXCLUSION
This function is performed on the key that is already operational and allows the signal to be transmitted until the key is released.
- Press together the 2 buttons and release them when the red LED starts flashing.
- Repeat the same operation four other 4 times, the LED flashes 5 times with a pause.
- While flashing, press the working button and release it when the red LED becomes fixed before switching off.
TECHNICAL CHARACTERISTICS
- BAND 433 MHz From 433.03 to 435.43 MHz
- BAND 868 MHz From 868.03 to 870.43 MHz
- POWER -6 dBm
- SUPPLY CR2032 battery
- CODE OOK/FSK
- CHANNEL NUMBER 2
For more information visit our website www.italfile.it or write to info@italfile.it
DISPOSAL
None of the product components present any particular risk. The different parts must be separated by type (plastic, electrical parts, battery).
DECLARATION OF CONFORMITY
The manufacturer ITALFILE S.R.L. declares that the radio apparatus IRIS model
TOP SN01422 complies with Regulation 2014/53EU (RED). The full test is
available on: www.italfile.it
Montecchio Maggiore Vicenza 09/11/2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>