BORMANN PRO BWR5219 Kurbadoros Plumber User Manual
- June 9, 2024
- BORMANN PRO
Table of Contents
BWR5219
050087
User Manual
v2.2
INSTRUCTIONS:
- Assemble the bracket (1) with main parts of the device using accordingly the respective holes and screw all parts as depicted.
- Put the roller (7) between the plates, insert the bolt (6) into the roller and use the pin (8) in order to get it fixed.
- Choose the module (10) according to the pipe size, fix the module into the rod (9) and screw up for safety.
- Put the pipe in, tighten the release valve (clockwise), and pump the pump (4) until the pipe is bent to the right angle you want.
- Let loose the release valve, after the rod returns to the original state, you can take the pipe out.
- When working, you can let loose the oil hole screw to release air.
Technical Data: Pipe Bender 12T 1/2-2”
-
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
-
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
-
Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
– WARRANTY –
The workshop equipment has been manufactured according to strict standards set by our company, which are aligned with the respective european quality standards. The workshop equipment is provided with a warranty period of 12 months. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the workshop equipment (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transportation (to and from) is entirely borne by the sender (client). The said equipment must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.
WARRANTY EXEMPTIONS AND RESTRICTIONS:
1)Spare parts that wear out naturally as a consequence of being used..
2) Workshop equipment damaged as a result of non-compliance with the
instructions of the manufacturer..
3) Workshop equipment poorly maintained or taken care of..
4)Use of improper spare parts or accessories..
5) Workshop equipmente given to third entities free of charge..
6) Damage as a result of mistaken assembly..
7) Damage as a result of poor quality of lubricant..
8) Damage as a result of not cleaning the equipment as required..
9) Equipment that has been modified or disassembled by unauthorized
personnel..
10) Equipment used for rent.
The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specific spare part the company reserves the right to replace the equipment with another of the same kind. A er all warranty procedures have been concluded, the warranty period of the equipment shall not be extended or renewed. The spare parts or equipment that are replaced remain in the possession of our company. Requirements, other than those mentioned in this warranty form, regarding repairing a piece of equipment or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.
WARRANTY
This appliance is a quality product. It was designed in compliance with
current technical standards and made carefully using normal, good quality
materials. The warranty period is 12 months and commences on the date of
purchase, which can be verified by the receipt, invoice or delivery note.
During this warranty period all functional errors, which, despite the careful
treatment de-scribed in our operating manual, are verifiably due to material
flaws, will be rectified by our after-sales service staff. The warranty takes
the form that defective parts will be repaired or replaced with perfect parts
free of charge at our discretion. Replaced parts will become our property.
Repair work or the replacement of individual parts will not extend the
warranty period not will it result in a new warranty period being commenced
for the appliance. No sepa-rate warranty period will commence for spare parts
that may be ted. We cannot offer a warranty for damage and defects on
appliances or their parts caused by the use of excessive force, improper
treatment and servicing. This also applies for failures to comply with the
operating manual and the installation or spare and accessory parts that are
not included in our range of products. In the event of interference with of
modifications to the appliance by unauthorized persons, the warranty will be
rendered void. Damages that are attributable to improper handling, over
loading, or natural wear and tear are excluded from the guarantee. Damages
caused by the manufacturer or by a material defect will be corrected at no
charge by repair or by providing spare parts. The prerequisite is that the
equipment is handed over assembled, and complete with the proof of sale and
guarantee. For a guarantee claim, only use the original packaging. That way,
we can guarantee quick and smooth guarantee processing. Please send us the
appliances postpaid or request a Freeway sticker. Unfortunately we will be
unable to accept appliances that are not postpaid. The warranty does not cover
parts that are subject to natural wear and tear. If you wish to make a
warranty claim, report faults or order spare parts or accessories, please
contact the after-sales center below: Subject to change without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>