logitech Harmony Configuration for Velbus Instructions
- June 3, 2024
- Logitech
Table of Contents
logitech Harmony Configuration for Velbus
Instructions
Start the Logitech HarmonyTM configuration software and click on “Devices
”.
Click on “Add Device”.
Select “Home Automation” and then select “Light Controller”. 
Select manufacturer “Velbus”.
Add labels to the buttons; remove unused channels (if any) and change the
order of the buttons to match your own preferences. 
Complete the wizard and update the remote control.
Tip: Buttons that are linked to the LCD only transmit the Infrared code
briefly. Sometimes a button with a longer response time (1, 2 or 3 seconds) is
needed or one wants to control a dimmer with it. To achieve this, the code can
be linked to a standard button or an action for lighting control should be
added. For this last method all buttons must be redefined as described in
“adding devices”. Now all buttons will transmit IR codes as long as the button
is operated.
“(Trademark) is either a registered trademark or trademark of Logitech in the
United States and/or other countries. All other trademarks are the property of
their respective owners.”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>