imoshion 8719295558036 Bluetooth Over-Ear Headphones with ANC User Manual
- June 3, 2024
- imoshion
Table of Contents
Bluetooth Over-Ear
Headphones With ANC
USER’S MANUAL
Overview
Functions & Features
- Wireless compatible with iOS/Android
- Up to 16-18 hour total playtime (About 2-3 hours charging time).
- Built-in microphone.
- Strong, adjustable design for comfort and durability.
- Foldable, portable design.
Technical Specifications
- Profiles supported: HFP/AVRCP/A2DP/SMP
- Working range: 8-10M
- Resistance: 32Ω±15%
- Sensitivity: 108±3dB
- Frequency range: 20HZ-20KHZ
- Charging voltage: 5V
- Charging current: 500mAh
- Driver size: 40mm
Included
1 x Headphones
1 x Aux-in cable
1 x Type C charging cable
1 x Adapter
1 x Carry pouch
1 x User manual
LED Indicator
Pairing | Flashing RED & BLUE |
---|---|
Connected | Blue light stays on |
Disconnected | Flashing RED & BLUE |
Music Playing | Blue light flash 1 time per 3 seconds |
Music Pause | Blue light stays on (After 3 Secs based on Android system/7 Secs |
based on iOS system)
Standby Mode| Incoming Call
Incoming Call| Blue light stays on status. Blue light flash 1 time per 3 Secs
when power on status
Charging Indicator Light
Charging: RED light stays on
Fully Charged: RED light turns off
When the battery is running low, the LED indicator light will start flashing
red and the headphones will issue an audible
warning. To recharge the headphones, insert the USB charging cable into
the port on the earcup and connect with a compatible power source (laptop,
computer, or via a mains plug adapter). To indicate that the headphones are
charging, the LED indicator light will show static red turns off when fully
charged.
First Time Set Up
- Long press the “ ” button for 3 seconds to power on
Step 2
- Activate Bluetooth Function
- Search & Select device name
- Pair
User Instructions
Turn On
To turn ON the wireless headphones, press and hold “ “ for 3 seconds. The LED
indicator light will flash red and blue alternately until the headphones are
successfully connected.
Turn Off
To turn OFF the wireless headphones, press and hold ” “ for 3 seconds. The
headphones will turn off after the red LED light has flashing twice.
Wireless Mode
Hold “ ” for 3 seconds to turn on the headphones. The LED indicator light will
flash red and blue alternately until the headphones are successfully
connected. Ensure that the headphones are no more than 10 meters away from
the device you want to pair. Use the Bluetooth search list on your device. To
confrm you have paired the headphones successfully with your device, the LED
indicator light will show static blue.
Power Status
When the headphones are connected with an iOS device (and SOME Android
devices), the current power status of the headphones will be shown in the
upper right corner of the device screen.
Line-in Mode
To listen via the AUX-in cable, insert the cable into the lineout port on the
right earcup. If you would like to listen to music wirelessly, you need to
remove the AUX-in cable and turn on the wireless mode.
Control Functions
MUSIC
VOLUME
PHONE CALLS
ANC FUNCTIONS
VOICE ASSIST | MANUAL ON/OFF |
---|---|
No. | Function |
--- | --- |
1 | Power On |
stays on 1 second then flashing Blue & Red
2| Power Off| Long press the “ ” buttonfor 3 seconds.| Power Off| Red light
flash 2 times
3| Pairing Mode| The device automatically enters the pairing mode after power
on| Pairing| Flashing Blue & Red
4| Pairing Su- ccessfully| –| Connected| Blue light stays on
5| | –| Disconnected| Flashing Blue & Red
6| Music Play| Press once the “ ” button| –| Blue light flash 1 time per 3
seconds
7| Music Pause| Press once the “ ” button| –| Blue light stays on after 3
seconds (Based on Andriod system) Blue light keeps on after 7 seconds (Based
on iOS system
8| Next Track| Long press “+” button for 2 seconds| –| –
9| Previous Track| Long press “-” button for 2 seconds| –| –
10| Volume Up| Press once “+” button| DU DU (Maximum)| –
11| Volume Down| Press once “-” button| DU DU (Minimum)| –
12| Automatic Reconnect After Power On| Long press “ ” button for 3
seconds,the device will be automatic pair with the last connection.|
Connected| Blue light stays on
13| Over- distance Disconnected| The device will disconnect from the phone
when it over-distance| Disconnected| Flashing Blue & Red
No.| Function| Functional Requirements| Voice Prompt| Indicator Light
---|---|---|---|---
14| Over- distance Reconnect| If the device has been disconnected from your
phone for less than 5 minutes, they can reconnect again if it comes back
within the valid range.| Connected| Blue light stays on
15| Disconne- cted| Long press the “+” and “-” buttons for 2 seconds at the
same time, theBluetooth will be disconnected, and if you restart the device
after disconnection, the device will be automatically connected.|
Disconnected| Flashing Blue & Red
16| Last Redial| Double click “ ” button.| –| –
17| Calls reminding| Press once the “ ” button when power on status.| Incoming
Call| Blue light flash 1 time per 3 seconds
Press once the “ ” button when playing or pause status.| Incoming Call| Blue
light stays on
18| Call Status| –| –| Blue light flash 1 time per 3 seconds
19| Answer Call| Press once the “ ” button| –| –
20| Hand Up Call| Press once the “ ” button| DU| –
21| Reject Call| Long press the “ ” button for 2 seconds.| –| –
22| Low Battery Clarm| It will prompt when the battery voltage is low to
3.4V.| Battery Low (Every 20 seconds)| Red light flash 1 time per 10 seconds
23| Low Battery Power Off Automatic| Power off automatically when the battery
voltage islower than 3.3V.| –| –
24| Charging Mode| –| –| Red light stays on
No.| Function| Functional Requirements| Voice Prompt| Indicator Light
---|---|---|---|---
25| Fully Charged| –| | Red light off
26| Charging Automatic Power Off| Plug in the charging cable to charge when
power on.| Power off| –
27| AUX-in Mode| Plug in the aux-in cable and the device will power off
automatically.| Power off| Red light flash 2 times
28| Automatic Power Off
BT Discon- nected| If the device is not connected within five minutes, it will
automatically shut down| Power off| –
29| ANC On| Push up the button to the “On”| –| Green light stays on
30| ANC Off| Push down the button to the “OFF”| –| Green light off
31| Activate Siri| Triple click “ ” button| –| Blue light stays on