imoshion TWS In-Ear Headset User Manual

TWS In-Ear Headset
User Manual

Accessories List

Overview of headset

How to use

User Manual
Power on: Take out earbuds from charging case / long touch the MFB 5 second.
Power off: Put earbuds into the charging case, turn off automatically / unconnected device, touch the MFB button for 5 seconds.

Pairing
Single Earbud Connection

1. Take out one earbud from the charging case.
2. Open mobile Bluetooth, find pair name “emotion TWS”, click and connect. (When the earbud and phone connect successfully, white light continuously flashing and you  could also hear prompt tone”Connected.)

Double Earbuds Connection

1. When you take out two earbuds from the charging case, earbuds will connect automatically. Master earbuds’ green and white light will flash alternately and earbuds start to enter painting status. (Now earbuds are in pairing and you could open phone or connect other Bluetooth devices.)
2. Open phone or other Bluetooth devices, search iMoshion TwS”, click it, and connect. (when Bluetooth paired successfully, you will hear ” connected”)
3. Re-connect automatically: It will re-connect automatically to paired devices. (Premise is that devices’ Bluetooth is on and earbuds paired record still exist. )

(Note):

1. These two earbuds already be paired before delivery.
   So when you get earbuds, it is unnecessary to pair two earbuds by yourself.

2. If earphones can’t pair each other ( both side earphones flash green and white light alternately), it’s necessary to pair manually: please long touch earphone (two side together) MFB button until green and white light flash alternately (TwS pairing status), then double touch “R’.

3. When TWS connects successfully, the “L” earphone white indicator flashes slowly, “R” earphone green and white light alternately flash. Then it’s available to connect with mobile. ( If pairng is not successful, please put back earphones to charging case and repeat above instructions)

Note:

1. When your eabuds connect to the phone and you find one earbud with no sound, you could turn off Bluetooth on phone and put earbuds back to the charging case. Then take them out again, these two earbuds will be paired successfully within 10 seconds, and only white light shows single continuous flashing, You could follow the above 1 and 2 steps to connect your phone.
2. If the device is crashed, keep pressing the multi-function button for 8 seconds to reset.

Button Definition
Answer an incoming call: Touch the MFB Reject incoming call: Long touch the MFB for 2 seconds
Hang up the phone: Touch the MFB
Play: Touch the MFB
Pause: Touch the MFB
Vol+: Long touch the R MFB
Vol -: Long touch the L MFB
Next Track: Double touch the R MFB (Play status)
Previous Track: Double touch the L MFB (Play status)
Last number redial: Double touch the MFB (Pause status)
Siri. Touch the L multifunction button three times Game Mode ON/OE Touch R tree times

Light status

1. Earbuds
   Charging, the green light on; Full charge, the light off; Pairing, the green, and white light flash;

2. Charging Case
   On charging, the red light flashes slowly; Full charging, red light flashes, When battery low, blue light flashes slowly; After discharged, blue light flashes.

Products Features

1. Waterproof IPX4 Level, Sweat-proof.
2. V5.0 solution, low power consumption, super compatibility.
3. Hands-free function.
4. True wireless earbuds, You can use by single or pair.

Specifications

Bluetooth Specifications
Bluetooth Version: V5.0
Profile Support: HSP, HFP, A2DP, AVRCP
Stand-by Time: 300 h
Talk Time: 3.5 h
Music Play Time: 3 h
Charging Time: 1 h
Charging Voltage: DC 5V
Frequency Range: 2.402G-2.480G
Ambient Temperature: -201+45 t:
Transmission Distance: 10m
Earbuds Battery Capacity: 35mAh
Charging Case Battery Capacity: 600mAh

Driver Specification
Driver Unit: 13 mm
Sensitivity: 96dB ± 3dB
Impedance: 160 ± 10%
Frequency Response: 20-20000Hz

Safety and maintenance

Please read the suggestions below in order to help prolong the product lifespan and clearly understand the warranty clauses.

• Keep the product dry, do not put it in humid circumstances to avoid short circuits.
• Do not expose it to the sun or high heat. High heating will shorten the lifespan of electronic components, damage batteries, and deform some plastic parts.
• Do not put it in cold circumstances to avoid damage to the PCB board.
• Do not attempt to take apart the product, especially non-professionals.
• Do not fall, vibrate strongly, strike with hard objects, to avoid damage to the inner electronic circuit.
• Do not use high chemical products, detergents to clean the item.
• Do not scratch the surface with sharp items to avert damaging the case and appearance.
• Do not make it charge 10 hours continuously for the sake of lifespan.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>