imoshion Ring Led Light User Manual
- June 9, 2024
- imoshion
Table of Contents
Ring Led Light
USER’S MANUAL
Product Parameters:
Demension: 30307cm
Weight: 1150g
Height: 26-172cm
Light color: Warm/ White
Color temperature: 3500-6000k
Input: DC 5V
Power: 5W-12W
Operation Guide
How to set up
|
---|---
1. Open the bottom organization niche and pull out the USB power cord.| 2.
Pull upwards the lamp ring to releaseit and rise the
light pole vertically, Grip the lamp ring to extend the
retractable pole.
|
3. Push downwards the lock sleeve and rotary clockwise
to fix the light pole| 4. Extend the pole to appropriate height you want.
then install the phone to the clamp holder tightly. Please use the joint hinge
to adjust angle.
How to restore
|
---|---
1. Unstall the smartphone.
Retract the light pole to initial length.| 2. Rotary the locking sleeve
counter clockwise and pull it up to unlock it
|
3. Push downwards the light ring to restore the lamp slightly.| 4. Do not
forget restore the USB cable after use.
Over head Shooting Guide
- Pull out the kickstand to sustain the light pole.
- Unstall the smartphone clamp mount and turn over then fix it again.
- Install your phone to the smartphone clamp holder mount and turn the light on.
- Adjust the height, angle and brightness to start the over head shooting.
Standing Guide
- Adjust the light ring to get a perfect angle for reading / lighting.
- Fasten the Knob screw clock-wise to lock the hinge to fix the ring light.
- Adjust the ligth color temperature and brightness to get a comfortble experience.
Maintenance
- Please pull out the USB cable when charging finished.
- When don’t use this product for long time, it might not be able to turn on instantly due to the battery out. You can recharge the battery to active it. Please charge the product every 3 months regularlly.
- Please do not drop or impact the product to avoid scratches on the surface
- This product is not water-proof, please keep it dry.
Notes
- Please do not disassemble or modify the product.
- Please do not submerge the product into water or put it in fire.
- It’s normal that the shell might become hot when use for a long time.
- Please do not keep the product under high temperature or high humidity