MACHEREY-NAGEL visocolor ECO pH 6.0-8.2 Test Tube User Manual
- June 3, 2024
- MACHEREY-NAGEL
Table of Contents
MACHEREY-NAGEL visocolor ECO pH 6.0-8.2 Test Tube
Method:
Photometric determination with phenolred as indicator
Measurement range:
pH 6.0–8.2
Contents
- sufficient for 150 tests
- 3 x 50 NANOFIX pH
- 1 instructions for use
Hazard warning
Information regarding safety can be found on the box’ label and in the safety data sheet. You can download the SDS from www.mn-net.com/SDS.
Procedure
Requisite accessories: test tubes 16 mm OD (REF 91680)
| Blank value | Sample |
|---|
Open empty test tube and fill up to
10 mL mark with test sample.
Clean outside of test tube.
| Open empty test tube and fill up to
10 mL mark with test sample, add
1 NANOFIX pH, close and mix. Clean outside of test tube.
Measurement
- The reagents are also suitable for photometric evaluation. For MACHEREY‑NAGEL photometers see manual.
- After use, rinse out test tubes thoroughly and seal them.
- The method can be applied also for the analysis of sea water.
Disposing of the samples:
Information regarding disposal can be found in the safety data sheet. You can download the SDS from www.mn-net.com/SDS.
Storage:
Store the test kit in a cool (< 25 °C) and dry place
MACHEREY-NAGEL GmbH & Co. KG · Neumann-Neander-Str. 6–8 · 52355 Düren ·
Germany
Tel.: +49 24 21 969-0 · info@mn-net.com · www.mn-
net.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>