onnline CHQ793 Bathroom luminaire Spa 600 Instruction Manual

June 3, 2024
onnline

onnline CHQ793 Bathroom luminaire Spa 600

LED arm light for dry or wet interior spaces with accessory for cabinet or mirror mounting. Aluminium and chromed plastic frame with opal plastic anti- glare shield. Installation to be performed with a suitable distribution box, e.g. OPAL IP55 CGF713 EAN 6438056236786, ABB AP9PP IP65 EAN 6418677309809.

onnline-CHQ793-Bathroom-luminaire-Spa-600-FIG 6

This product contains light source which has energy efficiency class E.

Non-replaceable light source

Non-replaceable control gear

onnline-CHQ793-Bathroom-luminaire-Spa-600-FIG 3 onnline-CHQ793-Bathroom-luminaire-Spa-600-FIG 4

General Safety Information

Electrical installations may only be carried out by qualified electricians. Please note! Before proceeding with installation mains connecting cable must be de-energized (fuse turned off). Please note the following symbols and safety instructions, in order to avoid damage caused by incorrect assembly or use:

onnline-CHQ793-Bathroom-luminaire-Spa-600-FIG 5Protection class 1: Lamps with this symbol connect them on the network side with the yellow/green protective earth to the protective earth terminal.
Protection class 2: for lamps with this symbol no protective conductor necessary for safe operation.
Protection class 3: Only operate lamps with this symbol with Safety Extra Low Voltage (SELV). Only connect to SELV circuits.
Minimum distance: This symbol explains the minimum distance of the illuminant to the illuminated, normally flammable surface.
Downlights: This symbol explains that the lamp is not suitable for covering with thermal insulating material.

Changes: Do not make any changes to the lamp or its connecting cable.
Commissioning: Do not operate the lamp if it or its connecting cable show visible signs of damage.
Care advice: Only clean lights when turned off, do not allow any moisture into connecting areas or on current-carrying parts. Cleaning agents can cause staining.

Disposal

Do not dispose of the waste electric appli-ances together with household waste. In conformity with the directive 2012/19/EN on waste electrical and electronic equipment and its implementation in the national laws, waste electrical and electronic equipment should be collected separately and trans- ferred for environmentally safe reuse.

Recycling as an alternative to the requirement of return:
The owner of the electrical and electronic equip-ment parting with the ownership is obliged to return it or to co-operate in the appropriate utilization of the equipment. For this purpose, the waste appli-ance may also be brought to a take-back station for disposal in accordance with the national recycling requirements and the legal acts concerning waste handling. This does not apply to the accessory parts and auxiliaries of the waste appliances, except for the electric components.

ADVICE ON DISPOSAL

In the interests of environmental protection, when you have no further use for your product, do not dispose of it along with household waste, but take it to a proper disposal facility. Informa-tion on waste disposal depots and their opening times can be obtained from your local authority. Faulty or used batteries must be recycled in accordance with Directive 2006/66/EC. Please return batteries and/or device to the specified collection points.

www.onninen.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

onnline User Manuals

Related Manuals