onnline Mud Stopper Instructions
- June 4, 2024
- onnline
Table of Contents
onnline Mud Stopper
CARE INSTRUCTIONS
Stainless steel is a timeless and modern floor drain material. It’s easy to keep steel clean and hygienic. Mud stoppers are made of high-quality materials in Finland. Stainless steel (AISI 304) is used as a raw material for the mud stopper. The mat is made of EPDM rubber and aluminum. The material of the basin is hard; this means it will not absorb odors or other impurities. To get the most out of our product, it is good to remember a few care tips.
Washing with normal soap is enough for the basic cleaning of the well and the rubber-aluminum mat. If necessary, you can use a chlorine-based detergent for cleaning; after washing, the detergent must be rinsed off thoroughly, especially from the seams.
- Do not leave ammonia-containing or other corrosive substances on the surface, but rinse them off as soon as possible, as they will damage the steel.
- Do not leave in contact with iron, steel, or other stainless metals.
- Do not use sharp objects for cleaning.
- Avoid using sandpaper.
- It is a good idea to clean the dirt trap regularly.
In addition, it should be noted that the rubber-aluminium mat and basin may be damaged if heavy carts, trolleys, or other heavy objects are pulled over it. If a heavy object has to be transported over the mud stopper, the mat should be removed and the basin should be protected by covering it with suitable plywood or metal plate.
Manufactured for
- ADDRESS: Valmistuttaja Tillverkad för Toodetud
- Onninen Oy, Työpajankatu 12, FI- 00580 Helsinki. Made in Finland.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>