Onnline CZL544 Bollard Luminaire Onnpark Town Instruction Manual
- June 14, 2024
- onnline
Table of Contents
Onnline CZL544 Bollard Luminaire Onnpark Town
SPECIFICATION PARAMETER
| Model number | CZL544 / 4548176 |
|---|---|
| Supply Voltage | 220-240V~, 50/60 Hz |
| Protection class | Class I |
| Type of wiring | Cable 1.0 m H07RN-F 3 x 1.5 mm2 |
| Color temperature | 3CCT: 3000 K / 4000 K / 5000 K |
| Luminous flux | 3200 lm |
| Color rendering index | CRI > 80 |
| Degree of protection | IP66 |
| Impact strength | IK10 |
| Housing color | Black (RAL9017) |
| Dimensions | Ø203 x 97 |
| Weight | 5.3 kg |
| Working Temperature | -30°C… +45°C |
| Storing Temperature | -40°C…+7 |
Max. number of luminaires per
miniature circuit breaker| B10: 55
C16: 88
Lumen output| 3000 K| 4000 K| 5000 K
---|---|---|---
CZL544| 25W| 3000lm| 3200lm| 3150lm
19W| 2250lm| 2450lm| 2400lm
12,5W| 1500lm| 1600lm| 1600lm
7,5W| 950lm| 1000lm| 1000lm
Important safety instruction
To ensure correct function and safety, please read and follow all instruction carefully before using the product, Basic safety precautions should always be followed when installing, including the following:
- Turn off power supply before installation or before doing any maintenance, cleaning, changing the globe or adjustment to the fitting.
- Do not install any luminaire near the heat source.
- IP grade please refer to product label, only IP54 can be used in wet or damp locations.
- Do not exceed the nominal supply voltage or amperage ratings.
- All wiring and installation of the light fitting must adhere to local and national wiring rules.
- Take care not to pull any electrical wires during unpacking as this may damage the connection.
- Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- The light source or driver contained in this luminaire shall only be replaced by the manufacturer or other qualified person.
- Please keep instruction for future reference.
Warning:
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
- Professional electrician for installation and maintenance only.
Turn Off Power Supply
Installation instructions
Packing List
| Base plate| 1 PCS
| Screw fixing plate| 1 PCS
| Screw M5*16| 6 PCS
| Screw M6| 3 PCS
| Nut M6| 3 PCS
DIMENSIONS
INSTALLATION INSTRUCTIONS
3 CCT + 4 Power
This symbol on products and or accompanying documents indicates that used and end of life electrical and electronic equipment should not be disposed of in household waste. For the proper disposal, treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential adverse effects on human health and the environment which could otherwise arise from inappropriate waste disposal and handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation.
This product contains light source which has energy efficiency class C.
Non-replaceable light source
Replaceable control gear by a professional
Onninen Oy
Työpajankatu 12, FI- 00580
Helsinki
www.onninen.com
