onnline Sealed Industrial Luminaire Onnproof Instruction Manual
- June 4, 2024
- onnline
Table of Contents
Instruction manual
Sealed Industrial Luminaire Onnproof
BEFORE YOU BEGIN
The installation should be carried out by an electrician or by any similarly
qualified person.
Prevent damages through electrostatic discharges and mechanical impacts. A discharge of static electricity may damage sensitive components. Always be properly grounded when touching leads or circuitry inside the luminaire. Use a wrist strap connected by a ground cord to the reflector. Avoid touching light sources (LEDs) with bare hands. This may cause a significant loss of brightness.
INSTALLATION
Cable installation options
Only for B-G
Luminaire materials
Aggressive chemicals in direct contact with the luminaire or in the form of
airborne substances can damage the fitting. So can unsuitable cleaning agents.
Do not use any alkaline or acidic solution or any solvents. Do not use any
cleansing agents that are aggressive on plastics.
CAUTION, RISK OF ELECTRIC SHOCK!
Disconnect the supply before opening! The light source contained in this
luminaire shall only be replaced by the manufacturer or his service agent or a
similarly qualified person.
Manufactured for
www.onninen.com
8009108
Documents / Resources
|
onnline Sealed Industrial Luminaire
Onnproof
[pdf] Instruction Manual
Sealed Industrial Luminaire Onnproof, Sealed, Industrial Luminaire Onnproof,
Industrial Luminaire, Luminaire
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>