TerraTrike TT000867 Chain Gobbler 3 User Guide
- June 4, 2024
- TerraTrike
Table of Contents
Chain Gobbler 3 (TT000867)
User Guide
Parts Included:
- Boom Plate (1)
- Frame Plate (1)
- Quick Release Skewer (2) TT000826
- Sleeve Washer (2)
- 10 Tooth Idler Wheel (2) TT000261
- 10mm Idler Spacer (2) TT000262
- M8x30mm Bolt (2) TT000280
- M8 Nyloc Nut (2) TT000287
- 8spd Chain TT000147
- 8spd Quick Link Set (1) TT000155
- 9spd Chain TT000146
- 9spd Quick Link Set (1) TT000154
- 10spd Chain TT000561
- 10spd Quick Link Set (1) TT000560
- 11spd Chain TT000786
- 11spd Quick Link Set (1) TT000785
Tools Needed:
- 3mm Hex Wrench
- 5mm Hex Wrench
- 13mm Socket Wrench
- Chain Tool
1. Assemble upper idler mount using boom plate, M8x30 bolt, 10mm idler
spacer, idler wheel, and M8 nyloc nut as shown.| 2. Assemble lower idler
mount using frame plate, M8x30 bolt, 10mm idler
spacer, idler wheel, and M8 nyloc nut as shown.
---|---
|
3. Locate the quick link and break the chain at the quick link. Connect the
provided 8, 9, 10, or 11-speed chain section and let hang.| 4. Remove bottle
cage standoff. Place upper idler mount beneath bottle cage standoff and
reassemble. (Applies to all models + GTS boom sized between 0” – 3” indicator
markings)
|
Recommended mounting position for GTS boom sized between 3”- 7”
indicator markings.| 5. Remove boom clamp bolts.
|
6. Install sleeve washers and insert quick-release skewers.| 7. Install
lower idler mount on quick-release skewers and secure with skewer nuts.
|
8. Route chain through the idlers as shown.| 9. Tighten and close quick-
release levers one at a time. Retighten the first lever
and close again to secure boom.
|
TerraTrike.com
800.945.9910