TerraTrike TT600906 Spyder Rear Rack Fit Kit Instruction Manual
- June 13, 2024
- TerraTrike
Table of Contents
TerraTrike TT600906 Spyder Rear Rack Fit Kit Instruction Manual
Tools Needed:
4mm Allen Wrench, 5mm Allen Wrench, 10mm Open Ended Wrench
Assembly Instructions:
Install Coated Clamps on rear frame section and attach Extended Rack Stays using the M6x18 bolts, M6 washers, and M6 nuts. Leave clamp bolts loose. When installing Rack Risers (see Rack manual), use the included M5x18 bolts and M5 washers. Ensure the M5 Standoff Spacer is placed between the Rack Risers and mounting holes on trike frame. Level the Rack and snug all fasteners.
Complete Assembly:
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Loading......