TerraTrike TT600904 Rear Rack Instruction Manual

TT600904 Rear Rack

Product Information: Rear Rack (TT600904)

The Rear Rack (TT600904) is an attachment for trikes that provides additional storage space. It comes with all the necessary hardware and tools required for installation. The rack is made of durable materials and can hold a considerable amount of weight.

Product Usage Instructions

Before installing the Rear Rack, remove the rear wheel and separate the upper seat stays from the lower seat stays. If you have a Spyder or ATC model, you will need to purchase the Rear Rack Fit Kit (TT600906) separately.

1. Attach Rack Stays to Rear Rack: Insert an M6x25 bolt through the Rack Stay mounting hole and thread an M6 Nylon Nut onto it. Fasten it tight. Insert the bolt through the slot on Rear Rack. Install M6 Thumb Nut and leave it finger tight.
2. Attach Rack Risers to Trike Frame: With the rear wheel removed, install M5x25 bolts into frame threads on the inside of dropouts. Attach Rack Risers to bolts and fasten tight using M5 Thumb Nuts.
3. Attach Rack to Rack Risers: Install Rear Rack onto Rack Risers using M16x16 bolts, M6 Flat Washers, and Strap Tabs. Refer to the exploded view for proper orientation.
4. Install Rack Clamps onto Seat Stays: With the upper and lower seat stays separated from one another, slide the Rack Clamps onto the lower seat stays with the hardware facing outward. Leave mounting bolts loose. Reinstall quick release clamps on lower seat stays and reconnect seat stays.
5. Attach Rack Stays to Rack Clamps: Attach Rack Stays to Rack Clamps on seat stays using M6 Thumb Nuts. Leave thumb nuts loose.
6. Level the Rack and Tighten All Fasteners: Level the Rack and tighten all fasteners to complete assembly.

Rear Rack (TT600904)

Tools Needed: 4mm and 5mm Allen Wrench, 10mm Open Ended Wrench

Assembly Instructions:
Prior to assembly, remove rear wheel and separate upper seat stays from lower seat stays. Remove quick release clamps. *Note: For installation on Spyder or ATC models, Rear Rack Fit Kit (TT600906) is required.

1. Attach Rack Stays (7) to Rear Rack (1):
   Insert M6x25 bolt (9) through Rack Stay mounting hole. Thread M6 Nylon Nut (8) onto bolt, and fasten tight. Insert bolt through slot on Rear Rack. Install M6 Thumb Nut (6) and leave finger tight. Refer to exploded view for proper fastener orientation.

2. Attach Rack Risers (2) to trike frame:
   With the rear wheel removed, install M5x25 bolts (11) into frame threads on inside of dropouts. Attach Rack Risers to bolts and fasten tight using the M5 Thumb Nuts (5).

3. Attach Rack to Rack Risers:
   Install Rear Rack (1) onto Rack Risers (2) using the M16x16 bolts (10), M6 Flat Washers (13), and Strap Tabs (3). Refer to the exploded view for proper orientation.

4. Install Rack Clamps (4) onto Seat Stays:
   With the upper and lower seat stays separated from one another, and quick release clamps removed, slide the Rack Clamps (4) onto lower seat stays with the hardware facing outward. Leave mounting bolts loose. Reinstall quick release clamps on lower seat stays and reconnect seat stays.

5. Attach Rack Stays (7) to Rack Clamps (4):
   Attach Rack Stays (7) to Rack Clamps (4) on seat stays using the M6 Thumb Nuts (6). Leave thumb nuts loose.

6. Level the Rack and tighten all fasteners.

Complete assembly:

Documents / Resources

| TerraTrike TT600904 Rear Rack [pdf] Instruction Manual
TT600904, TT600904 Rear Rack, Rear Rack, TT600904 Rack, Rack
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>