Fanttik EVO300 Portable Power Station User Manual
- June 3, 2024
- Fanttik
Table of Contents
Fanttik EVO300 Portable Power Station
Read this manual carefully before use and keep it for future reference.
Portable Power Station EVO300
Thank you for trusting in Fanttik Portable Power Station EVO300. It is designed as an outdoor emergency power supply with multiple output ports to charge most of your devices, including laptops, phones, tablets, drones, cameras, CPAP machines, etc.
PRODUCT OVERVIEW
- Display Screen
- Display Button
- DC Button
- 5V/3A Input
- PD 60W
- 12V/10A Output
- QC3.0 Output
- 12V/10A Output(120W)
- 5V/2.4A Output
- AC Output
- AC Button
- Handle
- LED Button
- Floodlight
- Anderson Port
- DC 7909 Input
PACKAGE CONTENTS
Carefully check package contents, if anything is missing or damaged, please contact online customer service for support.
DISPLAY SCREEN
General View
Display Description
- Charging Input Display
- Charging Input(DC +AC Dual Output) Display
- Display Switch
- AC Function Display
- DC Function Display
- DC Key +AC Key Display
LED Flashlight
To use the LED Flashlight, simply press the LED switch button to turn it on. There are 3 light modes including an SOS mode.
- To activate the low-light(50% of maximum brightness), press the LED light button once when the light is off.
- To activate the high-light(max brightness), press the LED light button twice in a row when the light is off.
- To activate the SOS light mode, press the LED light button three times in a row when the light is off.
- Press the LED light button four times consecutively to finish a cycle and turn off the light again.
RECHARGING
Multiple Input choices are compatible for the EVO300 Power Station
CHARGING DEVICES
EVO300 portable power station is a versatile product with different types of ports. Therefore, it is compatible and capable to charge multiple devices.Please note the EVO300 power station can’t support devices rated over 300W.
- USB Port: Smartphone, tablets, smartwaches, digital cameras, E-readers, etc.
- DC Output (12V): Drones, routers, car refrigerators, etc.
- AC Power: Laptops, displays, appliances, etc.
CHARGING MODES
it is highly recommended to fully charge EVO300 portable power station before activating it to charge other devices. To charge the EVO300 power station, users may choose wall charger, car charger, or solar panel. It may take 4-6 hours to reach a full charge with the included wall charge. (Solar panels’ efficiency might be impacted by weather issues)
Note: Please charge the product before use.
- Charge with Solar Panel(not included)
- Choose suitable solar panel(DC12~30V/120W)
- Solar panels will perform better in open south-facing locations that get direct sunlight. Simply connect solar panels to your EVO300 portbale power station.
- When the product is charged fully by the solar, it will stop charging automatically.
Notes
- Recommended to charge the product under 0~40℃ temperature environment.
- Charging times varies depending on the intensity of solar light.
- Make sure that the positive and negative poles of solar panels are connected correctly.
- Charge with AC wall Charger
- Plug the product into socket via the AC wall charger.
- Please unplug the charger when the recharging is finished.
Note: It is normal for this product to get warm during charging.
- Charge the product only after starting the engine
- Connect the product and the Cigarette Lighter Socket via the Car Cigarette Charging Cable.
- Charge the product after starting the car.
NOTE
- If the car battery is 12V, the product cannot be fully charged. If the car battery is 24V, the product can be fully charged.
- Charge by the USB-C Port (PD60W)
- Choose a USB-C Power Adapter(not included).
- Connect the product and adapter through the PD60W Port with the original USB-C to USB-C cable.
SPECIFICATIONS
| Model | EVO300 |
|---|---|
| Capacity | 83,200mAh/299Wh |
| USB-C-1 | PD60W |
| USB-C-2 | 5V/3A |
| USB-1 | 5V/2.4A |
| USB-2 | QC 3.0 18W |
| Battery | Lithium-ion |
| Frequency | 60Hz |
| Solar Charger | MPPT 12-30V |
| Weight | 10.9 lbs |
FAQ
Q1: What devices can EVO300 power?
A: Please note that the AC output port can only charge/power devices that operate at less than total 300 Watt.
Q2: Can the EVO300 be charged while using?
A: Yes, EVO300 supports pass-through charging. But we don’t suggest, it will cause damage to battery life.
Q3: How to know the working times for my device? Why does the duration of some devices deviate from the actual usage data?
A: Working time = 299Wh* 0.85/operating wattage of your device. The duration of our equipment is based on laboratory data, and the duration of specific equipment usage may vary.
Q4: Does EVO300 include a built-in MPPT controller?
A: EVO300 power stations have a built-in MPPT controller.
Note: Storage instruction: fully charged every 3 months for best results
and store it between -20 and 45 °C. Keep your portable power station away from
heat and direct sunlight in order to extend its life span.
Q5: Can it charge and discharge simultaneously?
A: Yes, but it is not recommended to charge and discharge at the same time in order to preserve battery lifespan.
Q6: How to extend the using time of CPAP?
A: Recommend to turn off its humidifier, heater, and set a lower pressure.
Q7: Can the AC output carry a refrigerator or air conditioner?
A: Workable for low power, and over 100W is not recommended. The starting power of refrigerators and air conditioners is generally 5~7 times higher than the rated power, which easily triggers AC overload.
Q8: Can two power stations be used in parallel?
A: No.
TROUBLESHOOTING
If the product cannot charge or power other devices, please checking according to the following steps:
- Make sure the power button is turned on.
- Make sure the AC and DC power button are on.
- Check the battery capacity, if it’s lower than 10%, please recharge the product as soon as possible.
- Make sure the load power connected didn’t exceed the limit power of the product, each port has a limit for the power connected.
SAFETY INSTRUCTIONS
IMPORTANT: Noncompliance may very likely lead to serious injury or death.
-
Do not disassemble, repair or modify the unit or the battery.
-
Do not place the unit close to or in a fire or expose it to the heat. Keep out of direct sunlight.
-
Do not charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
-
Only use the output socket to power external devices. Never connect the output to mains power under any circumstance..
-
Do not touch the unit or the plug-in points if your hands are wet.
-
Do not connect any metallic objects to the AC input or output.
-
Do not rub your eyes if fluids from inside the unit should get in your eyes.
-
Do not dispose the unit together with household waste.
-
Do not use any inappropriate power cords.
-
Do not operate the unit if it is not functioning correctly.
-
Do not move the unit if it is recharging or in use.
-
Do not put fingers or hands into the product.
-
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
-
Do not disassemble the power pack, take it to a qualified service person when service or repair is needed. Incorrect reassembly may result in a risk of fire or electric shock.
-
Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
-
Check the unit prior to every use. Do not use the unit if it is damaged, broken.
-
Do not use the unit if the power cord is damaged or broken.
-
Keep the unit away from children. Do not let the children use the power supply unit.
-
Keep this product away from pets.
-
Do not use or store the unit in an area or environment with high temperature.
-
Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with tap water.
-
In a storm, unplug the power cord from the socket.
-
Make sure that the device you are connecting is switched off before you connect.
-
WARNING: RISK OF EXPLOSIVE GASES
-
To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer of any equipment you intend to use in vicinity of the
battery. -
Do not charge the unit via power supply system that operate outside of 100~240V.
-
Do not place the unit on its sides or upside down while in use or storage.
-
Do not use accessories for other use.
-
If rust, peculiar odors, overheating or other abnormal circumstance are observed, stop using the unit immediately and contact the dealer or our customersupport.
-
The unit complies with all legal requirements for transport of dangerous goods.
-
Make sure that the unit is properly secured when transporting it in a motor vehicle.
-
Only charge, use and store the unit within an ambient temperature of 0 to 40℃(32~104℉).
-
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibration.
-
Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.
WARRANTY CARD
Your Warranty Includes
12-Month Coverage
Within 12 months of purchase, we will provide timely and effective online after-sales service. We will repair or replace any defective product (due to manufacturing fault) within the warranty period.
How to Return Your Fanttik Product
Contact support@fanttik.com with your order number.
We will issue you a return label for your return. Tear off the ‘Return Details’ page and fill in the details. Include this inside your return package. We will issue your replacement/refund on receiving the return package.
Return Details
In order to process your return as quickly as possible, we require the following information. Please fill out this form and include it in your return package.
- Purchase Name: ……………………………………………
- Order Number: ……………………………………………
- Date of Purchase: ……………………………………………
- Your Email Address: ……………………………………………
- Place of Purchase: ……………………………………………
If your purchase was fulfilled by Amazon, please use Amazon’s 30-day return service.
- Tel: +1 347-307-8957 Mon-Fri 9AM-5PM (PT)
- www.facebook.com/fanttikofficial
- support@fanttik.com
- Aukey Technology Co.,Ltd.
- Room102, Building P09, South China City, Electronic Trading Center, Longgang District Shenzhen
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>